Hydronic Insulation RADIANT PANEL

Hot water radiant baseboard heating comes complete with quick connect fittings to 3/8” Pex pipe, reflecting foils and mounting brackets. Panels are pure white in color.Capacity is 200 BTUH/Ft. @ 180°F EWT.

CAT. NO. MFG. NO. DESCRIPTION EACH 4W0015 4W0020 4W0025 4W0030 4W0035 4W0040 4W0045 4W0050 4W0055 4W0060 4W0065 4W0070 4W0075 4W0080 4W0085

1015W 1020W 1025W 1030W 1035W 1040W 1045W 1050W 1055W 1050W 1065W 1070W 1075W 1080W 1085W

1.5’ panel 2.0’ panel 2.5’ panel 3.0’ panel 3.5’ panel 4.0’ panel 4.5’ panel 5.0’ panel 5.5’ panel 6.0’ panel 6.5’ panel 7.0’ panel 7.5’ panel 8.0’ panel 8.5’ panel

$93.63 $103.11 $116.44 $132.21 $145.55 $160.26 $175.54 $190.96 $205.36 $221.49 $235.79 $251.13 $267.11 $282.74 $297.63

ACCESSORIES

CAT. NO. MFG. NO. DESCRIPTION 4W012 4W015 4W016 4W017 4W018 4W019 4W020 4W021

2000W 2003W 2010W 2011W 2012W 2013W 2020 9072

12” snap on cover plate 60” snap on cover plate

Inside corner w/bend supports Outside corner w/bend supports Right end cap Left end cap

Panel bracket (spare) White touch up paint (2 fl. oz.)

EACH $14.10 $71.43 $7.98 $9.76 $5.94 $5.94 $7.37

$24.74

INSULATED RADIANT FLOOR PANELS

The Crete-Heat panel system is an easily assembled modular board insulation, vapor barrier and radiant tube holding grid. It allows for simplified installation of hydronic radiant floor heating systems in basements, garages, main floor slab on grade and above grade installations where concrete or gypcrete in normally used. The modular system is designed to cut installation time and manpower requirements. Holds tube in place securely with built in, wide, 3” on center fastners. Strong shiplap interlock panel connections. Standard panels accept ½” and 5/8” pex

CAT. NO. MFG. NO. DESCRIPTION 10K123 CH-1 10K124A CH-2

Crete-Heat panel - 1’ 25” x 49” Crete-Heat panel – 2” 24” x 48”

Board size: EFFECTIVE AREA Total thickness: THERMAL RESIST Perm Resist: EACH 25” x 49” 24” x 48”

2 1/8” 2 7/8”

R-6 R-10

.51 perms .68 perms

$22.74 $28.29

CONCRETE SLAB INSULATION

REFLECTIX Concrete Slab insulation consists of seven layers. The first layer of white poly is bonded to foil to protect from lime in curing concrete. Each outer layer is bonded to a tough layer of polyethylene for strength. Two inner layer of insulating bubbles re- sist conductive heat flow while a center layer of polyethylene gives REFLECTIX high reliability and added strength. Use for insula- tion (and moisture/radon retarder) under a concrete slab, insulation under a radiant floor system or snow melt system (in a slab).

CAT. NO. MFG. NO. 7H392 DBWEF48125 48” X 125’ roll R-1.1

DIMENSIONS THERMAL RESIST WATER VAPOR TRANS MOLD & MILDEW NOMINAL THICKNESS EACH 0.02 Perms

No Growth 5/16” $380.37

Visit us at www.remichel.com

453

HYDRONIC & STEAM SYSTEMS