Condensate Pumps NXTGEN CONDENSATE PUMP

The VCMX-20ULS condensate pump is loaded with features requested by contractors. It is slimmer, it has an external replaceable safety switch assembly, easy mount steel hanging bracket assembly, a quarter turn removable check valve to allow easy pump cleaning and service, and an external test/run lever. The external test run lever allows operation/testing of the pump without removing covers, etc. to activate the pump. The condensate collection tray has been engineered to withstand attack by oil laden condensate water, and comes with 4 rubber vibration isolation feet. Uses CAT. NO. 2R332 3/8” condensing tubing. Temperature rated at 120°F.

CAT. NO. MFG. NO. 2R323A VCMX-20ULS 120

VOLTS DIMENSIONS H x W x D GPH @ 1 ft. GPH @ 5 ft. GPH @ 15 ft. GPH @ 20 ft. SHUT-OFF WEIGHT EACH 4.8 x 6.5 x 10.2”

84 75 42 10 21’ 6 lbs $77.63

CONDENSATE REMOVAL PUMPS CB15 & CB20

Beckett condensate pumps reach new heights with its new modern design. All black, less conspicu- ous with fewer parts for greater reliability. Simple installation with quiet operation and improved flow. Features include replaceable check valve , new improved duck-bill check valve design, larger high impact polystyrene tank, three intake holes, reliable micro switch float mechanism with safety switch cut-off, heavy gauge steel motor mount, stainless steel shaft and convenient discharge with barb & threads. This model is fully automatic with thermal overload protection and can mount from either side. Shipped with 6ft. power cord with 3 prong plug. Connects to Cat. No. 2R332 vinyl tubing. Temperature rated at 120°F.

CAT. NO. MFG. NO. VOLTAGE DIMENSIONS H x W x D WEIGHT GPH @ 1 ft. GPH @ 5 ft. GPH @ 10 ft. GPH @ 15 ft. SHUT-OFF EACH 2R322 2R310

CB151UL CB202UL

115 230

6-1/4 x 5 x 11-1/8” 6-1/4 x 5 x 11-1/8”

6 6

85 105

70 95

39 75

-- 36

15 ft. 20 ft.

$93.68 $76.25

VINYL PUMP TUBING for Condensate Pumps

AG-1 FLOAT SWITCH

AquaGuard float switch for condensate pan overflow protection. This switch does not require drilling or screwing of the switch to the pan. It uses a clamp body and two clamp

screws to tighten the switch to the pan flange. Cannot be used on pans with a curved flange, or those with curved lips at the top of the flange. It only works with pans that have straight vertical sides.

CAT. NO. MFG. NO. DESCRIPTION 2R305 2R332 2R336 2R893 2R337 2R899

5125 5137 5150 5162 5175 5187

2R900A CVTB EACH

1/4” I.D. Vinyl Tubing 100 ft. Roll $17.08 3/8” I.D. Vinyl Tubing 100 ft. Roll $18.14 1/2” I.D. Vinyl Tubing 100 ft. Roll $26.09 5/8” I.D. Vinyl Tubing 100 ft. Roll $32.16 3/4” I.D. Vinyl Tubing 100 ft. Roll $56.57 7/8” I.D. Vinyl Tubing 100 ft. Roll $34.92 1” I.D. Vinyl Tubing 50 ft. Roll

$60.43

CAT. NO. MFG. NO. DESCRIPTION EACH 2R034A

AG-1 Float Switch

CAT. NO. MFG. NO. DESCRIPTION 2R600 2R601

3/8” B (5 pack) 0638 CONDENSATE DRAIN HOSE

Most Mini Split units use 5/8” plastic drain hose. Slim Duct drain hose is designed with a cuff every 39” which can be cut to produce a 5/8” diameter female soket to press onto the condensate fitting on the indoor section. Slim Duct hose is an ivory colored, injection molded, non-kinking, weatherproof, corrugated hose for condensate application. Supplied in an easy feed carton.

CAT. NO. MFG. NO. DESCRIPTION 8H1018 DH - l6

EACH 5/8” x 164’ Coil Slim Duct Hose $85.19

BARBED COUPLINGS 0610

3/8” B x 3/8” MPT (5 pack) $20.58

EACH $1.66 $1.68

488

HYDRONIC & STEAM SYSTEMS