Regulator Accessories TEE CHECK MANIFOLDS

For use in systems that require uninter- rupted propane service during cylinder exchange. Especially for summer cottag- es, mobile homes and single appliance loads. Floating disc minimizes discharge of gas to the atmosphere when empty cylinder is bieng replaced.

CAT. NO. MFG. NO. INLET CONNECTION OUTLET CONNECTION EACH 1LP1032 1350R 1LP1038 1450R

F. POL 1/4” Inverted flare M. POL 1/4” M. NPT $29.73

This is a must for every service technician since it is so compact, durable and easy-to- use. It can be used to connect manometers and

MULTIPLE CYLINDER MANIFOLDS

Use with appropiate pigtails to connect multiple propane cylinders together. Ide- al for loads that require more than one cylinder to be in service at any given time. Provides a three-way tee function without an internal disc check.

CAT. NO. MFG. NO. Inlet Connections OUTLET CONNECTION EACH 1LP1030 1350E 1LP1036 1450E

F. POL M. POL 1/4” Inverted Flare 1/4” M. NPT $15.55

gauges to gas supply lines to check pressure. This tool is extremely handy. Hose can be used on either end. One end has 1/8” pipe thread and special 5/16” x 32 thread, other end has regular hose fit- ting and 1/8” straight pipe thread. Solid brass construction, actual size: 1-13/16” long.

CAT. NO. MFG. NO. EACH 9C673

TL-051 $19.34

CAT. NO. RANGE 6P001 6P002 6P003 6P004

PRESSURE & VACCUM GAUGES For fuel unit adjusting and service work. Quality gauges built for accuracy and dependability. Large easy to read 2” diameter dial with recalibration feature and 1/8” MPT connection.

0-30° Vacuum

0-15 lb. Pressure 0-30 lb. Pressure

EACH $6.87 $6.87 $6.87

0-100 lb. Pressure $6.87

CAT. NO. RANGE 6P005 6P006 6P008

EACH

0-200 lb. Pressure $6.87 0-300 lb. Pressure $6.87 0-600 lb. Pressure $10.68

SERVICEMAN’S FRIEND

INLET FITTINGS

These inlet fi ttings are available for assembly into fi rst stage of single stage regulators. All have 1/4” MNPT inlet and are machined from brass.

CAT. NO. MFG. NO. DESCRIPTION 1LP2314 970

1LP2320 970AX Hard nose POL with wrench nut. Hard nose POL with wrench nut and excess flow.

1LP2322 970AXS Soft nose POL with wrench nut and excess flow. 1LP1430 3199W

Heavy duty hard nose POL with wrench nut and excess flow.

1LP2318 970AW Soft nose POL with handwheel. 1LP2324 970HT 1LP2328 970S

Soft nose POL with handwheel and 60 DMS orifice. Soft nose POL with wrench nut and 60 DMS orifice.

EACH $4.06

AGA AND CGA MARKING

Manufacturers are now required to replace the “AGA” (American Gas Assoc) and the “CGA” (Canadian Gas Assoc) markings with the new “CSA” (Canadian Standards Assoc) marking on gas components. The “CSA” marking will denote compliance with applicable AGA & CGA safety standards. The CSA mark is a large “C” with the letters “SA” displayed in the middle of the “C”.

Current product may have any of the spec’d markings and conform to the required safety standards.

Additional information regarding the new marking can be obtained from CSA’s website at www.csa.international.org

Visit us at www.remichel.com

611

GAS SYSTEMS