Refrigeration & Condenser Motors

UNIT BEARING MOTORS

GE 11 & 21 FRAME Shaded Pole • 1550 RPM Overload Protected, All Angle

Used on many applications, such as: room air conditioners, fans, unit heaters, air coolers, condensing units, and other air-over motor applications. Motors have universal mounting holes. Sealed-in lubrication system. Resilient rings for cradel hose mounting. Leads 12” long.

GE 11 FRAME COUNTER CLOCKWISE ROTATION

(Viewed from End Opposite Shaft) 1550 RPM • 4” DIA.

Has four, 2” O.C., 8-32 tapped holes for shaft end mounting. Shaft: 5/16” dia. x 1-1/4” long.

CAT. NO. 1E683

MFG. NO. HP 1542

1/40

VOLTAGE MOTOR LENGTH EACH 230

5-1/2” $324.06

GE 11 FRAME REPLACEMENTS 3-3/8” DIAMETER

Replaces 1231, 1331, 1431 and 1432.

CAT. NO. MFG. NO. HP RPM VOLTAGE FRAME SHAFT DIA. 5/16”

2E837 671 1/15 1550 115/208-230 11 EACH $159.67

CAT. NO. 1E650

MFG. NO. 1488

DESCRIPTION 1-1/4” x 1”

EACH $42.27

SHAFT ADAPTERS for GE 51 Fame Motors

Converts thread shaft on GE 51 frame motors shown above. Flat hollow head set screws secure adapter on shaft.

GE 21 FRAME CLOCKWISE ROTATION (Viewed from End Opposite Shaft) 1550 RPM • 5” DIA.

Has four, 2-1/2”, O.C., 10-32 tapped holes for shaft end mounting. Shaft 3/8” dia. x 1-1/2” long. Leads 12” long.

CAT. NO. MFG. NO. HP 1E686

2331 1/20

VOLTAGE MOTOR LENGTH EACH 115

4-13/16” $307.28

ADJUSTABLE MOUNTING BRACKET For 51 frame motors. Height (shaft center to base): 4-1/8” to 5-3/8” adjustable.

CAT. NO. MFG. NO. EACH 1E690

08004 $35.32

CONDENSING UNIT FAN MOTORS CAT. NO. MFG. NO. RATING VOLTAGE RPM

8R614 8R615 8R617 8R611 8R609 8R608 8R610 8R612 8R607 8R618

TFM61 TFM91 TFM92

6 watt 9 watt 9 watt

115 115 230

TFM262 .035 HP 230 TFM351 35 watt 115 TFM352 35 watt 230 TFM372 1/20 HP 230 TFM502 1/15 HP 230 TFM1862 1/4 HP 230 TFM1864 1/4 HP 460

O.E.M. Exact Replacement motors for Tecumseh condensing units LEAD

1300/1500 1300/1500 1300/1500 1300/1500 1450 1450

1300/1500 1300/1500 1350/1625 1350/1625

RATED LOAD AMPS 0.28 0.67 0.36 0.86 1.4 0.7 1.1 1.4 1.9 1.9

LENGTH 30” 36” 36” 25” 18” 18” 29” 35” 40” 40”

SHAFT SIZE DIA. x LENGTH

FRAME DIA.

1/4” thread x 7/16” 3-1/2” 1/4 thread x 7/16” 3-1/2” 1/4 thread x 7/16” 3-1/2” 5/16 x 1-3/4”

4”

1/4 thread x 7/16” 3-7/8” 1/4 thread x 7/16” 3-7/8” 5/16 x 2-1/2” 5/16 x 2-1/2” 1/2 x 2-3/16” 1/2 x 2-3/16”

5” 5”

5-5/8” 5-5/8”

OVERALL LENGTH 3-1/2” 4” 4” 7”

4-1/4” 4-1/4” 6-7/8” 7-1/8” 7-1/2” 7-1/2”

EACH

$81.28 $76.58 $75.49

$355.17 $246.24 $225.63 $315.01 $344.39 $516.86 $266.06

858

MOTORS