TEE CONNECTORS CD9601

CD9601 • 1/4” m. flare x 1/4” flare nut with depressor tip x 1/4” m. flare on the branch with one valve core.

CD9602

CD9602 • 1/4” m. flare with valve core x 1/4” m. flare x 1/4” f. flare nut with depressor tip on the branch.

CD9603

CD9603 • 1/4” m. flare with valve core x 1/4” m. flare x 1/4” f. flare nut with depressor tip on the branch.

CD9611

CD9611 • 1/4” f. flare nut w/depressor tip x 1/4” m. flare access x 1/4” m. flare access on branch with one valve core.

CD9626

CD9626 • 1/4” male flare with core x 1/8” male pipe thread, and 1/4” male flare on the run, one cap and valve core.

CD9628

CD9628 • Same description as CD9611 but with- out depressor tip.

CAT. NO. MFG. NO. PKG.QTY. EACH 9R1074 9R1075 4G9969 10R1278 9R1077 10R1282

CD9601 CD9602 CD9603 CD9611 CD9626 CD9628

2 2 2 2 2 2

$7.97 $7.37 $7.41 $9.85 $7.37 $8.66

FORGED ACCESS TEES CD9613

CD9613 • 1/4” m. flare x 1/4” m. flare, two valve cores, no caps.

CD9616 • 1/4” m. flare x 1/8” MPT x 1/4” m. flare on branch, one cap and valve core.

CD9616

CD9620 • 1/4” m. flare x 1/4” m. flare x 1/8” MPT on branch, one cap and valve core.

CD9620

CD1428 • On the branch is a 1/4” male flare with core and cap. One end of the run has 1/8” male pipe thread, the other end is 1/8” female pipe thread.

CD1428 CD1438

CD1438 • On the branch is a 1/4” male flare with core and cap. Each end of the run is 1/8” male pipe thread.

CAT. NO. MFG. NO. EACH 10R6029 10R6030 10R1280 9R1085 9R1086

CD9613 CD9616 CD9620 CD1428 CD1438

$5.37 $6.10 $5.82 $6.26 $6.56

CD1424 CD1446

CONNECTORS CD1424 • 1/4” male flare (with core) x 1/4” FPT.

CD1446 • 1/4” female swivel flare x 1/4” female swivel flare. No depressor tips.

CD2597

CD2597 • 1-1/4” pc. of 1/4” copper tubing, dou- ble flared on one end with a 1/4” female flare nut and a depressor tip. Opposite end has a 1/4” male flare fitting brazed on. A core may be inserted in the 1/4” male flare, but not provided.

CD8725

CD8725 • features a gasket in the 1/4” hex nut. The valve body is stationary. When threads of existing system fittings are stripped and a new core won’t go in, use this connector. It has a core and no depressor tip.

CAT. NO. MFG. NO. PKG.QTY. EACH 9R1084 CD1424 1 4G5821 CD1446 1

$5.14 $5.03

CAT. NO. MFG. NO. PKG.QTY. EACH 9R1022 CD2597 2 10R1276 CD8725 2

$5.63 $3.29

CORE DEPRESSORS

These thumbscrew core depressors are designed to be used on the end of a charging hose. When attached to an access fitting, they can depress the valve core and control the flow of gas. This also means the core can be shut off before disconnecting, thus avoid- ing a split back on your hand. The seals in each part have broad compatibility with the new refrigerants.

CD3700 • has a metal to metal (steel to brass) seat, 1/4” male flare without core for hose at- tachment and a 1/4” female swivel with depres- sor tip and gasket.

CD5050 • For 1/4” male flares. Made small for use in close quarters.

CD2070 • For 1/4” male flares. Depresses valve core and controls flow. Back seats and retains gas in the hose. Internal shut-off also holds gas in the hose when disconnected.

CAT. NO. MFG. NO. EACH 9R1034 9R1048 9R1092

CD3700 CD5050 CD2070

OIL TAP

The Oil tap is installed on a semi-hermetic compressor for the changing of oil and testing procedures. The internal pressure helps discharge the oil from the crankcase and acid tests can be made while the compressor is running. It allows the addition by vacuum or removal by pressure of oil while compressor is running. And, you can detect haz- ardous refrigerant pooling in the crankcase before start-up and control the removal using a compound gauge. The oil tap can be permanently installed.

CAT. NO. MFG. NO. DESCRIPTION EACH 2Q236

CD1808 Oil Tap $9.88 Visit us at www.remichel.com 705

$21.04 $11.17 $23.08

REFRIGERATION EQUIPMENT & SUPPLIES