DIGITAL REFRIGERATION SYSTEM ANALYZER Features...

• Profiles 84 common refrigerants:

Including R-12, 22, 134a, 290, 401A, 401B, 402A, 402B, 404A, 406A, 407C, 408A, 409A, 410A, 414B, 416A, 417A, 420A, 422A, 502, 507, 508B, 600A (Upgradeable via USB for new refrigerants)

• Integrated temperature probe for automatic superheat and subcooling readings • Max and min pressure monitoring for control set-up • Auto zero key to eliminate manual recalibration • Vacuum detection in Hg

• Rugged case construction with rubber boot to tolerate impact and resist typical oils, acids, and sunlight • Data logging for review • Low battery indicator

For time saving diagnostics, the easy-to-read pressured bar graphs of this patented unit quickly tell you more than you could ever see with the vibrating needle of a typical pressure gauge.

You see pressure dynamics to readily know if the system’s thermostatic expansion valve is modulating properly, if liquid is flooding back into the systems, and more. Saturation, subcooling, and superheat readings are automatic to eliminate fishing in your wallet for reference cards. This almost immediate knowledge of system behavior and faults can help save up to 10 minutes and more on many jobs.

Bar graph segments shows changes from digital reading (range of ±2 psi on low side, ±8 psi on high side). Digital readings show resolu- tion of 1/4 psi on low side, 1 psi on high side. Temperature in middle is corresponding bubble and dew points for current pressures. Temperature, superheat or subcooling shown on lower right (eg. 14°F superheat).

Analyzer is shipped with 1/4” x 60” RYB and 3/8” x 60”Y Plus II hoses. Utilizes AA batteries for power supply (approx. 14 hours conti- nous useage under normal conditions).

CAT. NO. MFG. NO. TEMP. SENSOR RANGE TEMP. ACCURACY DIMENSIONS H x W x D WEIGHT EACH 2R519A

40815 PRESSURE ACCURACY

0.5% F.S. ± 1 least significant digit, calibration traceable to NIST

-100° F to 600° F +-1.8° F PRESSURE PORTS

Two 1/8” acting as low and high side gauges

6.7” x 8.3” x 3.6” WORKING PRESSURE Low side: 0-350 psi High side: 0-700 psi 3.2 Lbs. $1,645.82

PROOF PRESSURE HIGH SIDE Low side: 1000 psi

1500 psi

HEAT GUN

The dual setting heat gun (600°F & 1000°F) is ideal for use in the HVACR industry. Shock-proof and tough housing is durable and light weight. Use for coil defrosting, drying out condensate on components, and speeding up system evacuation. Carrying case included. UL, CSA, CE approvals

CAT. NO. MFG. NO. DESCRIPTION 1R435A 69092

EACH Dual Setting Heat Gun Kit $195.06

712

REFRIGERATION EQUIPMENT & SUPPLIES