UPBLAST “FUMEX” FANS FOOD SERVICE UPBLAST ROOF EXHAUST FANS - BELT DRIVE

Assembled, high temperature roof fans with UL762 label, NEMA # 3R external disconnect switch, grease trough and adjustable V-belt drive. Motors are 115V, or 115/230V - single phase. Roof curbs listed are 18” high (Per NFPA96), insulated, 18 ga., welded galvanized steel for flat roof application.

CAT. NO. MFG. NO. HP RPM* CFM@.25” CFM@.50” CFM@.75” CFM@1.0” CFM@1.25” SQUARE BASE ROOF OPENING ROOF CURB EACH PENDING FX13BFT 1/2 1414 2302 PENDING FX13BFT 3/4 1623 2694 PENDING FX18BFT 1/2 804 3559 PENDING FX18BFT 3/4 924 4212 PENDING FX18BFT 1.0 1002 4628 PENDING FX24BFT 3/4 662 5421 PENDING FX24BFT 1.0 718 5972 PENDING FX24BFT 1-1/2 825 7007

2118 2531 3021 3794 4258 4709 5367 6534

1892 2366 ---

3279 3818 3676 4542 5937

1568 2161 --- ---

3319 ---

3116 5185

---

1892 --- --- --- --- ---

4151

24-3/4’’ X 24-3/4’’ 16-1/4’’ X 16-1/4’’ RC23FS 24-3/4’’ X 24-3/4’’ 16-1/4’’ X 16-1/4’’ RC23FS 28-1/2’’ X 28-1/2’’ 20’’ X 20’’ 28-1/2’’ X 28-1/2’’ 20’’ X 20’’ 28-1/2’’ X 28-1/2’’ 20’’ X 20’’ 33-1/2’’ X 33-1/2’’ 25’’ X 25’’ 33-1/2’’ X 33-1/2’’ 25’’ X 25’’ 33-1/2’’ X 33-1/2’’ 25’’ X 25’’

RC27FS RC27FS RC27FS RC32FS RC32FS RC32FS

* Other capacities available by adjusting belt drives. Larger HP motors and models available as a special order. Note: Check with your local authority having jurisdiction for any special requirements necessary to comply with the codes.

FOOD SERVICE UPBLAST ROOF EXHAUST FANS - DIRECT DRIVE Solid state wall speed switch adjustable down to approximately 50% of fan capacity. Fits standard electric box.

UpBlast, high temperature roof fans with UL 762 label, NEMA # 3R external disconnect switch, and grease trough. Motors are 115V, single phase. Roof curbs listed are 18” high (Per NFPA96), insulated, 18 ga., welded galvanized steel for flat roof application.

CAT. NO. MFG. NO. HP RPM CFM@.25” CFM@.50” CFM@.75” CFM@1.0” CFM@1.25” SQUARE BASE ROOF OPENING ROOF CURB SPEED SWITCH EACH PENDING FX13QFT 1/4 1725 1143 PENDING FX16Q1FT 1/2 1650 2332 PENDING FX16Q2FT 3/4 1725 2684

1033 2114 2501

909

1868 2331

757

1582 2119

515

1320 1872

18-1/2’’ X 18-1/2’’ 11-1/2’’ X 11-1/2’’ RC17FS 20-1/2’’ X 20-1/2’’ 16-1/4’’ X 16-1/4’’ RC19FS 20-1/2’’ X 20-1/2’’ 16-1/4’’ X 16-1/4’’ RC19FS

Note: Check with your local authority having jurisdiction for any special requirements necessary to comply with the codes.

LT50 LT40 LT40

STANDARD UPBLAST ROOF EXHAUST FANS - DIRECT DRIVE Solid state wall speed switch adjustable down to approximately 50% of fan capacity. Fits standard electric box.

UpBlast fans with UL 705 label come with backdraft dampers, bird screens, pre-wired disconnect means. Motors are 115V single phase. Roof curbs listed are 12” high, 18 ga. welded galvanized steel, insulated for flat roof application. Suitable for use exhausting elevated temperature applica- tions where upblast discharge is desirable (such as dishwashers, ovens, pizza and steam hoods).

CAT. NO. MFG. NO. HP RPM CFM@.125” CFM@.25” CFM@.50” CFM@.75” CFM@1.0” SQUARE BASE ROOF OPENING ROOF CURB SPEED SWITCH EACH PENDING FX10S PENDING FX10R PENDING FX11Q PENDING FX13Q

1/25 1300 309 1/12 1550 500 1/5 1725 959 1/4 1725 1198

246 440 883

1143

152 325 722

1033 57

170 538 909

--- ---

313 757

Note: This model is NOT suitable for grease type food service exhaust. Check with your local authority having jurisdiction for any special requirements necessary to comply with the codes.

18-1/2’’ X 18-1/2’’ 11-1/2’’ X 11-1/2’’ RC17 18-1/2’’ X 18-1/2’’ 11-1/2’’ X 11-1/2’’ RC17 18-1/2’’ X 18-1/2’’ 11-1/2’’ X 11-1/2’’ RC17 18-1/2’’ X 18-1/2’’ 11-1/2’’ X 11-1/2’’ RC17

---

LT30 LT50 LT50

Penn-Barry Exhausters are not stocked, but are available for quick delivery!

901

AIR HANDLING & VENTING PRODUCTS