NO. 2 SWITCH

Used to add electrical low water cut-off to mechanical boiler water feeder models 47, 247, 51, 51-S and 53. Terminals for low wa- ter cut-off and low water alarm. Electrical rating 10.2 amps @ 115v, 5.1 amps @ 230v.

CAT. NO. MFG. NO. DESCRIPTION 3W264 3W265

110000 110100

EACH

2, Low Water Cut-Off Switch 2 w/manual reset

$184.32 $184.32

FS250 SERIES LIQUID FLOW SWITCHES

The FS250 series are general purpose liquid flow switches designed for flow sensing down to 5.8 GPM in 1” pipe size in horizontal installations. these flow switches provide a dependable and posi- tive means to make, or break an electrical circuit when flow in a pipe starts or stops. Typical uses include starting, or stop-

FS7-4 INDUSTRIAL LIQUID FLOW SWITCH

Designed for heavy duty service or for process liquids. Pressures up to 300 psi, tem- peratures to 300°F. Wetted parts are brass. Installs in tee of 1-1/4 thru 6” pipe. Connec- tion 1-1/4” MPT. Electrical rating 7.4 amps @ 120v, 3.7 amps @ 240v.

CAT. NO. MFG. NO. EACH 3W248

119700 $632.51 FS1 FLOW SWITCH

Combines sensitivity to low flow rates with large flow-thru capacity. Max. pressure 100 psi, max. temperature 225°F. 1/2” FPT straight-thru connections. Easily adjusted for sensitivity of flow. Electrical rating 7.4 amps @ 115v, 3.7 amps @ 230v.

CAT. NO. MFG. NO. EACH 3W276

113200 $382.76

WC-8-20 SINGLE UNIT CONDENSATE PUMP

for systems up to 8000 sq. ft. EDR and up to 20 lb. discharge pressure

This quiet, efficient long life, low maintenance steam system con- densate pump features cast iron receivers, bronze fitted centrifu-

gal pump with stainless steel shaft, one piece impeller and a heavy duty double pole float switch.

The motor is 1/3 HP, 3450 RPM, 40°C continuous rating, single phase, dual voltage, standard drip-proof, heavy duty ball bearing type with thermal overload.

CAT. NO.

MFG. NO.

RATING SQ. FT. EDR

2K920 WC-8-20 500- 8000

PUMP CAPACITY

12 gpm

CAT. NO. DESCRIPTION 2K923 2K922

PRESSURE RECEIVER CAPACITY

20 psi 9 gal WEIGHT EACH 180 EACH

Replacement Motor & Pump Assembly Replacement Float & Switch Assembly

$1,594.82 $455.21

$2,283.13

ping electrically operated equipment such as motors, automatic burners, and pumps. Can also be connected to alarms, and signal lights to indicate flow/no flow situations. FS251 is compact size with NEMA 1 enclosure. FS254 is a NEMA 4 enclosure, particu- larly good for applications in areas of high humidity, or high dust content, or outdoor applications. Flow switching is SP-DT; rated 7.4 amps @ 120 VAC, 3.7 amps @ 240 VAC. 1” MPT Connection - Maximum 250°F @ 160 PSI. Switches shipped with 1”, 2”, 3” and 6” stainless steel paddles.

CAT. NO. MFG. NO. DESCRIPTION 3W246A FS251 3W277A FS254

EACH

1” MPT Flow switch - NEMA 1 enclosure $181.38 1” MPT Flow switch - NEMA 4 enclosure $246.21

Visit us at www.remichel.com

467

HYDRONIC & STEAM SYSTEMS