Fan Relays FAN CENTERS

Specifically designed for automatic blower control of heating/air conditioning systems. Mounts on standard 4” junction box.

Contact rating: 1 HP -- 125v/250v, 13.8 amps at 120v, 6.9 amps at 230v. Transformer rated at 40vA, 115v primary, 24v secondary. Overall dimensions: 4-1/2 x 4-1/8 x 2-1/2”.

CAT. NO. MFG. NO. SWITCHING 3R113 3R116

90-113 90-118E SPDT

EACH $53.40

SP-NO, SP-NC $46.50 Type 93 3-POLE FAN RELAYS

Enclosed 3-pole, double throw relay commonly used in heating and air conditioning control

panels, appliances and vending machines. Push-on terminal con- figuration allows easy wiring to harness or receptacle.

Contacts rated at 10 amp full load @ 125v or 5 amp full load @ 250v. Overall dimensions: 2-1/8 x 1-7/8 x 1-9/16”.

CAT. NO. MFG. NO. CONTACTS COIL VOLTAGE EACH 3R272 3R274

43056 43058

3PDT 3PDT

24 208/240

Type 129000AR ADD-A-RELAY

These totally enclosed relays operate in any

position. Complete with aluminum base, bushing, locknuts and position locking plate to facilitate mounting in any electrical box with 1/2” knockout.

Contact rating: 1 HP -- 125v, 2 HP -- 250v, 18 amp continuous duty.

CAT. NO. MFG. NO. CONTACTS VOLTAGE EACH 3R123 3R124

90-123 90-124

SPDT SPDT

24 120 FAN RELAY

For 24v AC control of blowers and other line volt- age loads on heating, cooling or heating/cooling systems where 24v power supply is already avail- able. Compact size, 1/2” conduit hub permits mounting to standard junction box. Permits control of single or two speed fan motor.

Dimensions: 2-11/16”H x 12-15/16”W x 1-1/2”D. Contact rating: BLK-Red (NO) 16 amps @120v AC; BLK-BRN (NC) 9.8 amps @120v AC.

CAT. NO. MFG. NO. CONTACTS COIL VOLTAGE EACH 5G099

8A04-1 SPDT 24 $79.18

$89.82 $97.12

$29.67 $30.18

R8239 Series FAN CENTERS

Used for low voltage control of line voltage fan motors in heating and cooling equipment. Enclosed relay with 38 VA transformer. Mounts on 4 x 4” electrical box. Contacts: 1 normally open, 1 normally closed. SPDT switching for single or 2-speed fan operation. Electrical rating: 13.8 amps @ 120v, 6.9 amps @ 240v.

CAT. NO. MFG. NO. 1C494 1C4985

R8239A1052 R8285B1053

PRIMARY VOLTAGE 120

208/240

SECONDARY VOLTAGE 27 27

SWITCH ACTION SPDT SPDT

R8285B Series UNIVERSAL FAN

CONTROL CENTER

The R8285B transformer/relay provides low volt- age control of line voltage fan motors and auxil- iary circuits in heating, cooling or air conditioning systems. Control mounts to a standard 4” x 4” 1900 electrical box. This single control accepts 120, 208, 230 primary voltage and pro- vides 24 volt secondary control voltage. No need to carry multiple controls for different primary voltages. DP-DT contacts allow for multi-speed fan operation, while providing additional contacts to operate humidifiers, air cleaners, and other periferal line or low voltage devices. Incorporates the use of replaceable R8222D plug- in relay for ease of service. Replaces Honeywell: R8285A/B/C/E/F, R8239A/B/C/E/F, R8226A/B/C, R8227A/B/C, R856B, R8102; RBM/W-R: 90-113, 90-116; Mars: 24013, 24016.

CAT. NO. MFG. NO. 1C4985

R8285B1053

AMPS @120v AMPS @208/240v EACH 12

6

ST82B Series FAN MANAGER

Used in air conditioning and heat pump systems to continue indoor blower operation for 80 sec- onds after compressor has shut off. Consists of an

R8222 relay with an add-on electronic time delay board. Electrical rating: 12 amps @ 120v, 6 amps @ 208/240/277v, 3 amps @ 480v.

CAT. NO. MFG. NO. 1C498

ST82D1004 24

COIL VOLTAGE SWITCHING ACTION EACH DPDT

R8225 Series FAN RELAY

For 24 volt circuit control of line voltage fan motors and auxiliary circuits in heating, cooling and heat/cool systems. Has 1 normally open contact, one normally closed contact; built-in spud for junction box mounting. Electri- cal rating: N.O contacts - 14 amps @ 120v, 8 amps @ 240v. N.C. contacts - 14 amps @ 120v, 7 amps @ 240v.

CAT. NO. MFG. NO. 1C490

R8225A1017

COIL VOLTAGE SWITCHING ACTION EACH 24

SPDT Visit us at www.remichel.com $98.43 793 $43.38 $85.61 EACH

$87.92 $85.61

CONTROLS