MONOXOR® III CARBON MONOXIDE ANALYZER

INFORMANT® 2 LEAK DETECTOR

Detects all CFC, HCFC, HFC refriger- ants and all combustible gases. This one instrument handles both types of detec- tion simply by popping off one tip and popping on another. It is microprocessor controlled with “Heated Diode” tip, er- gonomically designed, and lightweight.

Bacharach’s Monoxor® III, offers service technicians the easiest and most affordable way to locate CO in ambient air as well as in stack flue gases. The Monoxor® III CO Analyzer is a battery pow- ered, hand-held instrument that can quickly and accurately measure levels of CO between 0 and 2,000 ppm. In addition to locating CO in ambient air, the Monoxor® III is supplied with a stainless steel probe and five feet of tubing to sample CO found in flue gases of residential furnaces, combustion appliances, commercial and industrial boilers. An optional wireless IrDa printer provides a permanent record of the CO level.

19-8104 Monoxor® includes probe and hose assembly with inte- gral water-trap/filter, hard carrying case and 4 “AA” batteries.

19-8105 Monoxor® probe and hose assembly with integral water- trap/filter and a hard carrying case. Plus an IrDA printer with an assortment of printer accessories including an AC adapter, roll of paper, in-car charger, belt clip, magnet and 4 “AA” batteries.

CAT. NO. MFG. NO. DESCRIPTION 1F102A 1F102B 1F182A

19-8104 19-8105 24-7265

EACH

Monoxor® III less printer $959.46 Monoxor® III with printer $1,405.23 Replacement CO sensor $347.77

SNIFIT® CARBON MONOXIDE ANALYZER

Analyzers accurately measure Carbon Monoxide concentration levels in room air. These continuously operating instruments quickly and accurately mea- sure levels of CO between 0 and 1, 999 ppm. Both analyzers are compact 5.5”L x 2.0”W x 1.6”D. Power source is 9V battery which will last 1500 hours.

Weighs just 8 oz. One button on and off operation with one button calibration on both units.

Snifit® Model 50 (2F2002): The stand alone Snifit 50 allows you to continuously measure and display CO levels between 0 and 1,999 ppm. With 1 ppm resolution, the Snifit 50 can accurately measure high and low concentrations quickly and easily. The highly visible display indicates ppm CO and a backlight is avail- able to use in low light conditions.

CAT. NO. MFG. NO. DESCRIPTION EACH 2F2002

19-7060 Snifit Model 50 $626.39

Features consist of an audible alarm, 20” probe, largest battery capacity in the industry, reliable solid state sensor, 3 operational status LED’s and 10 ultra-bright LED’s. Detects the following gases; Acetone, Acetylene, Benzene, Butane, Ethanol, Ethylene Oxide, Gasoline, Hexane, Hydrogen, Industrial Solvents, Methane, Paint Thinners, Propane, Natural Gas and Naptha.

CAT. NO. MFG. NO. DESCRIPTION 1F463

19-7051 EACH Combustion Gas Detector $555.97

Features sequential LED indicators on the side and bottom for easy visual confirmation, no matter the position of use. Comes with 4 AA batteries, 2 color-coded tips, manual, and hard carrying case.

CAT. NO. MFG. NO. DESCRIPTION 2F550

19-8038 SIZE H x W x L

Combination refrigerant/ combustible leak detector

EACH * 2.25 x 1.75 x 9.65” $846.78

LEAKATOR® 10 COMBUSTIBLE GAS LEAK DETECTOR

The Leakator® is a battery powered portable instrument designed to detect combustible gas leaks. The Leakator® pinpoints a small gas leak quickly, safely and easily. Meets all of the demanding criteria for detecting any combus- tible gas leaks. It is supplied with a one year

warranty, its own carrying case, installed and tested gas sensor, flexible probe and instruction manual.

1038

TOOLS & TEST INSTRUMENTS