Previous Page
BALANCING BALL VALVES COMPRESSION NUT TO COPPER
Balancing ball valves combine a balanc- ing screw with a ball valve in one unit. To balance flow, use a 1/8” hex key to
adjust flow from 0% to 100%. 10 turns open is 100% flow (CV as shown above), 5 turns open is 50% flow, and 1 turn open is 10% flow. (CV value indicates flow at 1 psi loss.) Integral ball valve allows quick, positive shut off.
CAT. NO. MFG. NO. DESCRIPTION 4W460 4W462 260847 260297
1/2” RAUPEX x 1/2”C Female (Sweat) Balancing Valve
3/4” RAUPEX x 3/4” C Female (Sweat) Balancing Valve
CV
PACKAGE QTY.
0 - 3.0 1 0 - 6.0 1 Note: Make solder connection before connecting to RAUPEX pipe. INSTALLATION ACCESSORIES
POLYMER SUPPORT BENDS WITH SCREW HOLE
These reinforced polymer bend supports create 90° bends without an elbow, quickly snapping over RAUPEX pipe. ‘Ear’ on the inside of the bend has a screw hole for secure mounting to a support or stud.
CAT. NO. MFG. NO. DESCRIPTION
4W184 4W186
266207 266227
PACKAGE QTY.
3/8” and 1/2” Polymer Support Bend 1 3/4” Polymer Support Bend
1 EACH
$3.42 $4.66
PVC BEND GUIDES
Create 90° bends without fitting an elbow by inserting RAUPEX pipe
into these rigid plastic PVC bend guides. PVC bend guides provide protection at slab penetrations and create professional appearance at manifolds.
CAT. NO. MFG. NO. DESCRIPTION 4W180 4W182
266170 266175
3/8” and 1/2” PVC Bend Guide 1 5/8” and 3/4” PVC Bend Guide 1
PACKAGE QTY. EACH $2.85 $3.20
PE PROTECTION SLEEVE
Protects RAUPEX pipe at slab and wall penetrations, expansion and construction joints, abrasive surfaces, and ultraviolet
light (sunlight). Use in joist space heating or other hydronic ap- plications to prevent RAUPEX pipe from rubbing directly against wooden members.
CAT. NO. MFG. NO. DESCRIPTION 4W188 236107 4W189 236117
Protection Sleeve for 3/8” and 1/2” Pipe
Protection Sleeve for 5/8” and 3/4” Pipe
HOLE SIZE* PACKAGE QTY.
1” 1-1/4” 100 ft. 50 ft. *This is the recommended hole size to be drilled for proper installation. EACH $45.22 $35.86 EACH $59.79 $50.74 CAT. NO. MFG. NO. 4W145A TSW174
THERMOMETERS
Thermometers are recommended in supply and return piping to monitor fluid temperatures.
DESCRIPTION Thermometer with 1/2” MPT Well Fitting
Thermometer for use with 1” pro balance valve
PACKAGE QTY. 1
4W146A TSW174-SW Thermometer with 3/4” Solder Well Fitting 1 4W147 250218
1 RAILFIX
For the most rapid installation of RAUPEX pipe in a thermal mass or in a sand bed. Reduces installation time for more economical pipe installation. Fabricated of durable polymer material and pre- drilled for fastening. Pipe holders are spaced at 2” on-center.
CAT. NO. MFG. NO. 4W1725 4W1727
DESCRIPTION
259238-2M 266257
1/2” RAILFIX - 6.5 ft. 3/4” RAILFIX - 6.5 ft.
PACKAGE QTY. EACH 1 1
$11.19 $14.05
TALON DRIVE HOOKS
Twin talon drive hooks safely secure 3/8”, 1/2”, or 3/4” pipe to wood sub-floors, joists or in joist cavities. Pre-installed barbed nails prevent backout.
CAT. NO. MFG. NO. DESCRIPTION 4W174
260866 Twin Talon Drive Hooks
PACKAGE QTY. EACH 100
PLASTIC HOLDING PIN
Plastic Holding Pins are used to secure RAILFIX and Fixing Rail to rigid installation.
CAT. NO. MFG. NO. DESCRIPTION 4W173 259268 Plastic Holding Pin
PACKAGE QTY. BAG 500
PACKAGE QTY. BOX 5000
EACH $0.32 INSULATION SCREW CLIPS
Insulation screw clips secure pipe to rigid insulation. Can be used with 1/2”, 5/8”, and 3/4” RAUPEX tubing. Designed to screw into
insulation and snap over pipe. Rapid installation using screw/star clip ratchet tool # 260886.
CAT. NO. MFG. NO. DESCRIPTION 4W170
260836 Insulation Screw Clips
PACKAGE QTY. EACH 1000
$0.68 PRESSURE TEST KIT
This test kit is designed to test the Rehau radi- ant floor heat system before final installation of the floor above. The air pressure tester threads into the 1” isolation valve on the manifold, and
connects to an air hose (schrader valve included). Tester furnished with a pressure gauge that reads from 0-200 PSI.
CAT. NO. MFG. NO. DESCRIPTION 4W200 257334
EACH RAUPEX air pressure test kit $84.32 Note: Always follow published pressure testing instructions for RAUPEX piping systems. Visit us at www.remichel.com $32.73 EACH
$31.61 $37.31 $17.56
443
HYDRONIC & STEAM SYSTEMS