Water Heater Accessories

PRESSURE/TEMPERATURE RELIEF VALVE

for Gas and Electric Water Heaters

A self-closing temperature-pressure relief valve specifi- cally for gas-fired water heaters. ASME listed and AGA approved. All bronze body with stainless steel spring. Thermostatic element with special coating prevents accu- mulations of mineral deposits and corrosive action. Male inlet, female outlet. Temperature relief is set at 210° F.

CAT. NO. MFG. NO. ELEMENT LENGTH 2”

2K413 2K557 2K556 2K555

10L-2

100XL-3-125 4” 100XL-3-150 4” 100XL-8

2K570* L100XL-3

8” 4”

SIZE PRESSURE RELIEF SETTING

3/4” 75 lb 3/4” 125 lb 3/4” 150 lb 3/4” 150 lb 3/4” 150 lb

BTUH RATING

EACH

80,000 $21.61 100,000 $24.62 100,000 $26.38 100,000 $24.20 100,000 $9.04

*Extended inlet model. For heaters with thick jacket insulation up to 2” thick.

PRESSURE/TEMPERATURE RELIEF VALVE for Oil-Fired Water Heaters

Fully automatic temperature and pressure relief protec- tion for hot water supply tanks and heaters. Bronze body construction with non-mechanical seat-to-disc alignment that will not stick or freeze. Standard with test lever and 5” thermostat for installation in hot water outlet or directly in available tank tappings. Valve is 5-1/2” high

(less thermostat). These valves are ASME rated, certified by AGA, and meet current FHA requirements. Male inlet, female outlet. Temperature relief factory set at 210° F.

CAT. NO. MFG. NO. SIZE PRESSURE

2K814 2K815

40XL-5-125 3/4” 40XL-5-150 3/4”

RELIEF SETTING 125 lb. 150 lb.

BTUH RATING

EACH

200,000 $166.93 200,000 $166.93

WATER HAMMER ARRESTOR

Compact device eliminates annoying noises and damage to pipes and appliances caused by water shock. Permanent pre-charged chamber with sealed- in diaphragm which flexes to absorb shock. Will not waterlog. Maximum water temperature: 180° F.

CAT. NO. MFG. NO. PIPING 2K406 150A

CONNECTIONS 1/2” MPT

Maximum Pressure 150 psi

HEIGHT DIAMETER EACH 4-1/2” 3-1/2”

DIELECTRIC UNIONS & WATER CONNECTORS

Iron-to-brass unions prevent corrosion due to electroly- sis caused by joining copper water heater connections to existing steel or iron pipe systems. Substantially extends water heater life.

CAT. NO. MFG. NO. 1K219 1K220 1K221 1K222

3002

3005A 3001A 3003

4G6306 5G701

4G6307 4G6308

3003 1” 3001A 1”

3001A 1-1/4” 3001A 1-1/2”

SIZE

3/4” FPT x 1/2” sweat 3/4” MPT x 3/4” sweat 3/4” FPT x 3/4” sweat 3/4” FPT x 3/4” FPT 1” FPT x 1” FPT 1” FPT x 1” Sweat

1-1/4” FPT x 1-1/4” sweat 1-1/2” FPT x 1-1/2” sweat

EACH $9.34

$11.23 $9.38

$18.52 $33.69 $13.61 $38.58 $57.67

$58.33 FLOODMASTER SYSTEM

This is a standard solenoid used with a float switch. Automatically closes the inlet water to the water heater as soon as it detects water in the water heater drain pan. Once the inlet water has been shut down, the unit can be manu- ally reset to allow inlet water flow. Does not use electricity until it senses water in the drain pan.

CAT. NO. MFG. NO. DESCRIPTION 5W606 RB-206

EACH

FloodMaster system (24 v.Solenoid, Plug in transformer, float switch and ties)

$496.03 CAT. NO. MFG. NO. 5W600 UP15-10SU7PTLC 115

VOLTS MAX. WORKING PRESSURE 145 lb.

CAT. NO. MFG. NO. DESCRIPTION EACH 5W602 595926

Comfort Valve $85.45

MAX. FLUID TEMPERATURE 150°F

EACH $531.03 “INSTANT COMFORT” Hot Water Re-circulating System

The water circulation system that eliminates cold water runoff at the faucet, using a bypass valve and pump with a timer to control water flow. This system includes pump, control valve and timer for add-ons to existing systems. Additional comfort control valves may be added as required. Offers whisper quiet operation, unique wet rotor design, power cord and built-in 24hr. timer , 3-position, 15 minute intervals.

Valve is furthest from Hot Water Tank

432

WATER HEATING EQUIPMENT