HSI IGNITOR KIT For Armstrong

The 41-604 hot surface “mini-ignitor” is made of a unique, non-porous, high strength propriety material for durability. 3 second heat up time, 4” housing length - 120 volts Direct replacement for Armstrong # 44744-2 ignitor.

CAT. NO. MFG. NO. DESCRIPTION EACH 6C129

41-604 Norton mini-ignitor $54.60

1950 & 1951 Series THERMOPILES

The 1950 and 1951 series thermopiles (pilot gen- erators) are designed for use on self-powered gas control systems. They may be used to replace all Robertshaw and similar competitive devices. Both models include mounting nuts. 36” length.

CAT. NO. MFG. NO. CONNECTION TYPE EACH 6C429 6G948

1951-536 1950-532

Coaxial Two Lead

$63.46 $58.09

1970 Series

UNI-COUPLES® UNIVERSAL THERMOCOUPLE

Engineered for the replacement thermocouple market, the 1970 Uni-Couple® fits all pilot burner types. Improved design provides exter- nal threads on the lower nut allowing use of the lower nut only in many threaded pilot brackets. The nuts may be pushed, pulled or threaded onto the tip for ease of installation.

CAT. NO. MFG. NO. TUBING SIZE EACH 6C445 6C446 6C448 6C449 6C450

1970-018 1970-024 1970-036 1970-048 1970-060

18” 24” 36” 48” 60”

$9.01 $9.85

$10.26 $13.04 $20.97

SNAP-FIT THERMOCOUPLES 1980 Series

The 1980 series Snap-Fit thermocouples are similar to the 1970 series but offer extra in- sulation from high ambient temperature with the brass sheith. Easy installation adapter sleeve and universal fit design, allows use in most pilot burners.

CAT. NO. MFG. NO. TUBING SIZE EACH 6G968 1980-018 18” 6G969 1980-024 24”

$9.58 $9.19

HORIZONTAL ANGLE TYPE #1 KIT

CAT. NO. MFG. NO. LENGTH EACH 6C310

1851-002 36” $196.75

HORIZONTAL ANGLE TYPE #2 KIT

CAT. NO. MFG. NO. LENGTH EACH 6C308

1851-051 24” $199.53

HORIZONTAL ANGLE TYPE #4 KIT

CAT. NO. MFG. NO. LENGTH EACH 6C309

1851-151 24” $197.19

VERTICAL BOTTOM INLET TYPE #6 KIT

CAT. NO. MFG. NO. LENGTH EACH 6C329

1851-252 24” $176.48

1851 Series MINI-PILOT®

EXACT REPLACEMENT & UNI-KITS®

Combination pilot burner and thermocouple in kit form. Non-aerat- ed type which insures against failure due to linting. Can be used on all gases—need no orifice change. Inlet size 3/16” with fittings to adapt to 1/4” inlet size when required.

Visit us at www.remichel.com

821

CONTROLS