TEMPERING VALVES

For residential and small commercial domestic hot water service. Mixes cold water with hot water as it leaves heater to conserve hot water and prevent excessive temperatures. Pipes into water heater output line, maintains constant temperature level of domestic hot water.

Adjustable range 120°-160°F. Maximum water pressure 150 psi, maximum water temperature 210°F. Sweat connections.

CAT. NO. MFG. NO. CONNECTIONS EACH 2K600 2K598 2K601 2K599

70A

70AT 70A

70AT 70ARK

1/2” Solder 1/2” FPT

3/4” Solder 3/4” FPT

CAT. NO. MFG. NO. DESCRIPTION 2K605

Replacement Thermostat all models

$106.07 $182.10 $128.05 $224.24

EACH $53.46

FEED WATER PRESSURE REGULATORS

Iron or bronze body. Features highest capacity performance as well as simplified servicing. Maximum working pressure: 100 psi, Maximum temperature: 212°F.

CAT. NO. MFG. NO. Inlet Connections BODY EACH 2K400 2K401

1156F T1156F

2K400S S1156F 2K399 2K398

1/2” Threaded Iron

1/2” Union Thread Iron 1/2” Union Sweat Iron

$85.33

$103.10 $93.67

TB1156F 1/2” Union Thread Bronze $98.67 SB1156F 1/2” Union Sweat Bronze $98.67

HIGH PRESSURE WATER PRESSURE REGULATORS, BRONZE BODY

VACUUM RELIEF VALVE

Automatically vents a system if vacuum occurs. Opens at less than 1/2” vacuum.

Automatic venting of a closed system to atmosphere when a vacuum is created, thereby, permitting air to enter and prevent vacuum conditions which could siphon the water from the system and burn out a heater or collapse a tank. Max. temperature:250°F, max. water working pressure: 200 psi.

CAT. NO. MFG. NO. Inlet Connections EACH 2K410

N36 1/2” $45.63

For supply water pressures up to 300 lbs. and can be adjusted from 25 to 75 lbs. Standard settings is 50 lbs. The by-pass feature incor- porated into these valves accurately controls build-up of system pressure and thermal expansion by equalizing the system and sup- ply pressure when relief setting is in excess

of available supply main pressure. NPT union inlet x female outlet. Maximum temperature: 160°F.

CAT. NO. MFG. NO. Inlet Connections 2K408 25AUB 2K409 25AUB

EACH

1/2” FPT Union Thread $123.72 3/4” FPT Union Thread $144.76

FEED WATER PRESSURE REGULATOR, BRONZE BODY

FLOW REGULATOR

Adjustable multi-orifice flow regulator al- lows selection of 2-1/2, 3, 3-5/8 or 4 GPM flow rate, covering the requirements of near- ly all tankless heater installations. Bronze body construction, 1/2” sweat connections.

CAT. NO. MFG. NO. DESCRIPTION EACH 2K565

P3 Flow Regulator $43.62

Has tight seating check valve with integral strainer and unitized design for simplified servicing. Set at 15 psi. Maximum temperature: 212°F. Maximum pressure: 100 psi.

CAT. NO. MFG. NO. Inlet Connections EACH 2K404

N256 3/4” Threaded $248.41 DUAL CONTROL VALVES

FLOAT & SWITCH ASSEMBLY

Complete float and dual switch assembly. One piece unit facili- tates installation and assures user of the most up-to-date construc- tion. Maximum steam pressure: 15 psi. Replacement for all series 89 and 101 Watts low water cut-offs.

CAT. NO. MFG. NO. DESCRIPTION 2K416

SAN89D EACH Float & Switch Assembly $599.67

Iron body dual control. Combines construc- tion features of No. 1156F and rugged iron body diaphragm relief valve, set at 30 lbs. Size 1/2”. Maximum temperature 212°F.

CAT. NO. MFG. NO. Inlet Connections EACH 2K402

1450F

2K402A T1450F 2K402B S1450F

1/2” Threaded $164.16

1/2” Union Thread $160.21 1/2” Union Sweat $160.21

Visit us at www.remichel.com

481

HYDRONIC & STEAM SYSTEMS