PACKAGED SYSTEM GEOTHERMAL UNITS 16 - 18 E.E.R. - R-410A

1 stage - 208/230 volt - 1 phase Features...

• High efficiency Copeland scroll compressor • Appliance white powder coated steel construction • Cabinets bolted together for easy access • Flow switch protected

• Solid state controls with “re-try” to eliminate nuisance service calls • Hot water generator (desuperheater) with factory installed pump

ON COMPRESSOR

GWS Series

ON PARTS

ON REFRIGERANT CIRCUIT

The GWS Series products are highly efficient, reliable and quiet; providing exceptional operating efficiency throughout a wide range of entering water temperatures. Insulated cabinets and coaxial heat exchangers reduce noise, condensation, and corrosion at all rated operat- ing temperatures. Designed for use with hydronic coils/air handlers.

WATER TO WATER MODELS WITH COPPER COAXIAL COILS CAT. NO. MFG. NO.

10G152 GWSR048A11CC 4 10G153 GWSR060A11CC 5

NOMINAL TONS CIRCUIT AMPACITY MAX. FUSE AMPACITY WEIGHT EACH 21.8 24.7

45 55

1” 1”

3/4” 3/4”

MFG. NO. DIMENSIONS H x W x D LOOP CONNECTION DESUPERHEATER CONNECTION LOAD GWS048 24 x 26 x 34” GWS060 24 x 26 x 36”

1” 1”

320 Lbs. $8,283.87 370 Lbs. $9,369.79

UNIT PERFORMANCE - GROUND LOOP HEAT PUMP Water-to-Water Models Single Compressor

MODEL CAPACITY HEATING BTU/HR HEATING COP COOLING BTU/HR COOLING EER GWS036 Nominal GWS048 Nominal

31,600 44,700

3.7 3.6

34,200 48,400

18.1 17.9

Note: Rated in accordance with ISO Standard 13256-2 which includes Pump Penalties. Heating capacities based on 32°F EST and 104°F ELT. Cooling capacities based on 77°F EST and 53.6°F ELT. Entering load temperature over 120°F heating and under 45°F cooling is not permissible. Floor heating is most generally designed for 85°F entering load temperature.

278

Contractor Qualification Required – Limited Dealer Opportunities Available

AIR CONDITIONING & HEATING EQUIPMENT