S87 Series ELECTRONIC DIRECT SPARK IGNITION MODULE

Replacement modules for Honeywell and most other brand direct spark ignition systems used on furnaces, boilers and heating appliances.

May be used with any DSI gas valve rated at 2.0 amps or less. Uses separate electrodes for spark ignition and flame sensing. Automatic system lockout after trial for ignition. Electrical rating: 25v AC @ 2.0 amps.

CAT. NO. MFG. NO. MAX. LOCKOUT TIME APPLICATION 2C526

S87D1004 6 sec. EACH 100% safety shutoff,Natural or LP gas $313.23

UNIVERSAL ELECTRONIC HOT SURFACE IGNITION (HSI) MODULE S8910 Series

Universal replacement module for all single or dual rod hot surface ignition systems using Norton 201 and 271 or equivalent ignitors. Allows one-time selection of one or three ignition trials per call for heat, and four second or seven second trial periods. Includes LED status display.

Replaces Honeywell S89, S890; White-Rodgers 50E47, 50F47; Robertshaw HS780. Electrical ratings: 24v AC control voltage; 120v AC HSI ignitor voltage.

CAT. NO. MFG. NO. 2C531

TIME S8910U1000 96 sec.*

APPLICATION Natural or LP gas

EACH $244.34

S89F Series ELECTRONIC DIRECT SPARK IGNITION MODULE

Provides electronic control of direct spark ignition systems, with external spark transformers, used on gas-fired fur- naces, boilers, conversion burners and other heating appliances.

May be used with any DSI gas valve rated at 2.0 amps or less. Uses separate electrodes for spark ignition and flame sensing. Electrical rating:Two power supplies required. 24v and 120v, 2.2 amps @ 24v, 1.5 amps @ 120 v.

CAT. NO. MFG. NO. MAX. LOCKOUT TIME APPLICATION 2C536

S89F1106 4 sec. EACH Natural or LP Gas $338.83

S8610U Series ENHANCED UNIVERSAL INTERMITTENT IGNITION MODULE

The S8610U series incorporates all of the features of its predecessors PLUS. This control works on intermittent pilot ignition systems using combination ignitor/sensors in furnaces, boilers and other heating appliances. Improvements include “field selectable diagnostics”. Module is suitable for use with vent dampers and use with natural or LP gas. Provides ignition sequence, flame monitoring, and safety shutoff functions. EnviraCOM Enabled.

New improved model replaces: S86, S860, S90 S8610U1008, S8610F1008, S8610H1004, S8610H1020, S8610H, 1025, S8610U1003, S8610U1004, S8610U1008, S8610U1025, S8670D1000, S8670U1000, S8680J1004 and S8680U1004.

CAT. NO. MFG. NO. 2C560U

FIELD SELECTABLE OPERATION SEQUENCE ELECTRICAL RATINGS

S8610U3009 0 or 30 second prepurge 15 or 90 second trial for ignition

Pilot - 1.0 amp running, 10.0 amps inrush Main - 2.0 amps running, 20.0 amps in rush

EACH $245.43

748

CONTROLS