BALANCED COMBUSTION SYSTEM ON TANK ON PARTS

Allows side wall venting of specially designed and matched oil fired water heat- er without the use of a side wall power venter. This system is sealed combustion and lends itself nicely to “Heat Pump Helper” applications. The system comes with specially designed and fully controlled heater, burner and the special “Bal- anced Combustion”, thru-the-wall, concentric termination fitting. BCS sealed combustion systems reduces space heating costs and noise while eliminating odors & fumes typical of power vented systems.

This system will allow up to 15 ft. max. horiz. 4” exhaust and 20 ft. max horiz. 3” intake. Pipe and elbows not included in system pricing. System uses nozzle line solenoid valve and Honeywell R8184P primary relay. Comes with factory installed T & P valve.

If water heaters are installed in a commercial or industrial application then there is only a three year warranty on the tank.

CAT. NO. MFG. NO. STORAGE CAPACITY

5H938 51BCSE 50 gal.

RECOVERY @ 100° RISE 138 gph

FIRING RATE 1.00

DIMENSIONS WEIGHT 58”

*Flue is 6” dia. at heater and must be reduced to 4” dia. pipe

DIMENSIONS DIAMETER 24”

PIPING CONNECTION INLET

3/4” NPT

PIPING CONNECTION OUTLET 3/4” NPT

FLUE WEIGHT EACH 6 / 4” 410 $5,275.37

Here’s how the BCS works:

No chimney is required--heat generated in the sealed combustion heater pulls outside air in through vent holes in the outer shell of the fl ue. Exhaust gases are expelled through the inner shell and out a second set of vent holes. This confi guration preheats the combustion air while providing a cool outer surface for mounting through combustible materials.

Because the BCS uses only outside air for combustion, it’s the “perfect fi t” for installation in today’s tight homes. Its performance also shines in small, confi ned areas with limited airfl ow and restaurants or other businesses having negative atmosphere pressure problems caused by using large exhaust fans.

Visit us at www.remichel.com

425

WATER HEATING EQUIPMENT