PACKAGED OIL BOILERS -- WATER

The Burnham C3 & C4 Series cast iron packaged boiler is designed for high capacity use in new or replacement applications. Capable of an operating efficiency of up to 86.2% with high efficiency kit, this unit combines cast iron durability, high efficiency flame retention burner technology and top quality components and controls to provide years of efficienct, reliable heating service. Available in capacities of 89,000 and 140,000 BTUH with or without factory installed domestic tankless heater. Side mounted tankless heater, top flue design.

Standard features include wet base design, pre-formed lightweight target wall, Beckett AFG high efficiency burner, cast iron swing-out burner mounting plate, easy access side cleanouts, circulator piped to return- convertible to supply, all controls mounted and pre-wired, theraltimeter, ASME relief valve, boiler drain and draft regulator. Equiguard® Ex- tended Service Agreements are available for Burnham Boilers.

C3 & C4 Series

ON HEAT EXCHANGER

ON ENTIRE BOILER RESIDENTIAL APPLICATIONS

LESS TANKLESS COIL CAT. NO. MFG. NO.

D.O.E. CAPACITY BTUH

2H373 PC3WC-TBWN 89,000 2H374 PC4WC-TBWN 140,000

I=B=R NET OUTPUT BTUH 77,000

121,000

A.F.U.E.% FIRING RATE GPH .75 gph 1.20 gph

83.5 81.7

TANKLESS COIL --- ---

DIMENSIONS H x W x D PIPE

32-1/2 x 23-1/2 x 16” 32-1/2 x 23-1/2 x 20”

WITH TANKLESS COIL CAT. NO. MFG. NO.

D.O.E. CAPACITY BTUH

2H370 PC3WT-TBWR 89,000 2H371 PC4WT-TBWR 140,000

I=B=R NET OUTPUT BTUH 77,000

121,000

A.F.U.E.% FIRING RATE GPH .75 gph 1.20 gph

83.5 81.7

TANKLESS COIL

3.25 gpm 3.50 gpm

DIMENSIONS H x W x D PIPE

32-1/2 x 23-1/2 x 16” 32-1/2 x 23-1/2 x 20”

SUPPLY 1-1/2” 1-1/2”

PIPE

RETURN 1-1/2” 1-1/2”

FLUE WEIGHT EACH

6” 6”

524 580

$4,530.39 $5,194.80

PIPE

SUPPLY RETURN 1-1/2” 1-1/2”

1-1/2” 1-1/2”

FLUE WEIGHT EACH

6” 6”

524 580

$4,041.83 $4,707.88

SMALL CAST IRON, OIL FIRED WATER BOILER W/REAR FLUE OUTLET

This completely packaged boiler has an AFUE rating of 83.5% and was designed for specific installation requirements but will function anywhere a boiler with the specifications of 31-1/2”H x 24”W x 17”D plus 12” for burner are required. Includes Taco circulator, Beckett “AFG” burner and tankless coil mounted on right side. Equiguard® Extended Service Agreements are available for Burnham Boilers.

CAT. NO. MFG. NO.

2W925 V13R2-TB *Plus 12” for burner.

D.O.E. CAPACITY BTUH 89,000

CAT. NO. DESCRIPTION 2W926 Rear Outlet Canopy for above

NET OUTPUT BTUH 77,400

EACH $114.34

DIMENSIONS H x W x D* PIPING CONNECTIONS SUPPLY 1-1/2”

31-1/2 x 24 x 17”

PIPING CONNECTIONS RET.

1-1/4” FLUE WEIGHT EACH 6” 538 $4,293.24

V13R2 Series

370

BOILERS