Previous Page
Condenser Fan Motors CONDENSER FAN MOTORS
Shaft Up or Horizontal Mount 5-5/8” DIAMETER • Shaft End Enclosed Lead End Open
Features include weather resistant reversing plug, leads, shaft with flat, shaft slinger, extended thru-bolts on shaft end and automatic reset thermal protector. Ca- pacitors not included, they must be ordered separately.
CAT. NO. MFG. NO. HP RPM/
1E517 1E518 1E519 1E520
FS1026S FS1037S FS1056S FS1076S
1/4 1/3 1/2 3/4
1075 1075 1075 1075
SLEEVE BEARINGS SPEEDS
208-230 208-230 208-230 208-230
48 48 48 48
VOLTAGE FRAME SHAFT DIA. 1/2” 1/2” 1/2” 1/2”
EACH
$144.21 $138.49 $166.78 $203.59
MasterFit™
REPLACEMENT MOTOR Enclosed Frame • Two-Speed Reversible
Substitute for “Trip Saver” motors from Rheem/Ruud and Emerson Electric. Can be mounted by the extended thru bolts on the motor or belly band. Multi-positional with 27” leads.
CAT. NO. MFG. NO. HP 1E544 RPM/ SPEEDS FSE6000 1/3 , 1/5 1075/M
VOLTAGE FRAME SHAFT DIA. 1/2”
208/230 48 EACH $153.04
CAT. NO. MFG. NO. HP RPM/
1E792 2E560* 1E515J 2E462* 1E695
F1038 X400 X208 X099
F1076 * 1” Thru-bolts, shaft end.
1/3 1/2 1/2 3/4 3/4
BALL BEARINGS SPEEDS
825/1
1075/1 825/1
1075/1 1075/2
208-230 460
208-230 460
208-230
VOLTAGE FRAME SHAFT DIA. 1/2” 1/2” 5/8” 1/2” 1/2”
48 48Y
48YZ 48Y 48
EACH
$368.74 $158.84 $703.95 $180.20 $414.01
MultiFit™ MULTI-MOUNTING SYSTEM
These MultiFit™ motors are universal replace- ment “42” frame motors. Two motors will replace 1/4, 1/5, 1/6, 1/8, 1/10 and 1/12 hp, “42” frame condenser motors. These motors featuer a multi-mount stud arrangement allow-
CONDENSER FAN MOTORS TOTALLY ENCLOSED
All Angle Mount • 5-5/8” DIAMETER PSC • Thermally Protected
Continuous Duty, Air Over • Electrically Reversible
Features include drain holes with plugs each end and water slinger on shaft. Capacitors not included, they must be ordered separately.
CAT. NO. MFG. NO.
2E829 2E562 1E550
629
2E563B FE1026SB 1E552
FSE1038S
1E518E FSE1036 2E564B FE1036SB 1E519E FSE1056
FSE1058S 8G9923 779
SLEEVE BEARINGS HP RPM/
1/6
FSE1016SV1 1/6 FSE1028S
1/4 1/4 1/3 1/3 1/3 1/2
2E565B FSE1056SB 1/2 1E554
1/2 3/4
SPEEDS 825
1075 825
1075 825
1075/2 1075
1075/2 1075 825
1075
208-230 208-230 208-230 208-230 208-230 208-230 208-230 208-230 208-230 208-230 208-230
48 48 48 48 48 48 48 48 48 48 48
VOLTAGE FRAME SHAFT DIA. 1/2”
EACH $226.40
1/2 x 6” $134.55 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
$207.75 $90.65
$238.06 $229.63 $97.23
$328.01 $107.92 $285.45
1/2 x 6” $164.55
ing replacement of Emerson, GE, Fasco, Westinghouse and Uni- versal Electric motors with fixed mounting studs. Totally enclosed, reversible, all angle mount, sealed ball bearing motors.
CAT. NO. MFG. NO. HP
1E565 1E566
9722 9723
RPM/ SPEEDS
1/8, 1/10, 1/12 1075/3 1/4, 1/5, 1/6
1075/3
VOLTAGE FRAME SHAFT DIA. 1/2” 1/2”
208-230 42 208-230 42
EACH
$131.31 $140.39
Note: 1E565 uses 5 mfd @ 370 v capacitor. 1E566 uses 7.5 mfd @ 370 v capacitor.
4-IN-1
REPLACEMENT MOTOR
MULTI-HORSEPOWER Totally Enclosed • Reversible CAT. NO. MFG. NO. HP RPM/
1E745 1E746 1E747 1E748
FE1016S FE1026 FE1036 FE1056
1/6 1/4 1/3 1/2
1075
1075/2 1075/2 1075/2
BALL BEARINGS SPEEDS
208-230 208-230 208-230 208-230
48 48 48 48
There’s no longer any need to stock four models when one will do the job...and do it better! This motor will function in all mount- ing positions (shaft up, down and horizontal). Will mount with a standard 48 frame belly band, on thru bolts or by the shell holes (required for rheem replacements), Refer to the capacitor guide. Direct replacement for Rheem Motors #51-20668-11-1/6 hp, 51- 23055-11-1/5 hp, 51-23054-11-1/4 hp, 51-23053-11-1/3 hp.
VOLTAGE FRAME SHAFT DIA. 1/2” 1/2” 1/2” 1/2”
EACH
$251.53 $306.29 $318.06 $357.23
CAT. NO. MFG. NO. HP 1E548 ORM5458 1/3-1/6
VOLTAGE FRAME SHAFT DIA. 1/2”
208-230 48Y EACH $180.50
Visit us at www.remichel.com
859
MOTORS