SPLIT SYSTEM COMMERCIAL HEAT PUMPS - R-410A

Heavy duty construction and compact, top discharge design are utilized in the TPA series commercial heat pump outdoor section. Performance matched to TAA series air handling units, these provide a simple, highly efficient year round heating/cooling system for commercial applications. Features include highly efficient scroll compressors, copper tube/aluminum fin coils, high pressure & loss-of-charge controls, solid state defrost system with adjustable duration, high capacity filter driers, time delay, rapid shift 4-way reversing valve, suction line accumulator, factory installed TXV & service valves with sweat connections. 7-1/2 models utilize one condenser fan motor, while the 10 ton models use dual fan motors; all motors are direct drive PSC, totally enclosed, and are equipped with rain shields. Cabinet is constructed of heavy gauge steel & features integral base rails & removable service panels.

CAT. NO. MFG. NO.

COOLING BTUH

10H840 TPA090S4SN1Y 89,000 10H841 TPA090S4SN1G 89,000 10H842 TPA120S4DN1Y 112,000 10H843 TPA120S4DN1G 112,000

HEATING BTUH 88,000 88,000

E.E.R. VOLTAGE PHASE

11.0 11.0

116,000 11.0 116,000 11.0

CIRCUIT AMPACITY

208/230-3 38 460-3

19

208/230-3 44 460-3

24

MAX. FUSE AMPS 60 30 70 40

TP Series • 7-1/2 thru 10 ton capacities

ON COMPRESSOR

ON PARTS

DIMENSIONS H x W x D CONNECTIONS LIQUID

48-3/4 x 60-1/8 x 43-5/8” 5/8” OD 48-3/4 x 60-1/8 x 43-5/8” 5/8” OD 48-3/4 x 60-1/8 x 43-5/8” 5/8” OD 48-3/4 x 60-1/8 x 43-5/8” 5/8” OD

CONNECTIONS SUCTION 1-3/8” OD 1-3/8” OD 1-3/8” OD 1-3/8” OD

WEIGHT EACH

460 lbs $6,588.96 460 lbs $6,588.96 540 lbs $8,227.23 540 lbs $8,227.23

Note: All units use R-410A refrigerant, field supplied (units shipped with holding charge). Equipped to operate down to 30°F, addition of low ambient kit allows operation to 0°F.

ACCESSORIES FOR SPLIT SYSTEM COMMERCIAL HEAT PUMPS CAT. NO. MFG. NO. DESCRIPTION

10H860 47W16 10H861 47W17 10H863 44W17

Hail guard Hail guard

USED ON: EACH TPA090 TPA120

Low ambient control All

$587.63 $587.63 $151.54

HIGH EFFICIENCY, SPLIT SYSTEM HEAT PUMP OUTDOOR UNITS - 13 S.E.E.R. - R-410A - 3 PHASE

The 4SHP13LC series condensing units are built to achieve maximum effi- ciencies while maintaining compact physical size. Units use high efficiency scroll compressors, are shipped with driers installed, discharge muffler and solid state time-temperature defrost control with Quiet Shift feature. Quiet top discharge design with enhanced copper tube with aluminum fin con- denser coil. 208/230volt - 3 phase.

CAT. NO. MFG. NO.

COOLING BTUH

10H1307A 4SHP13LC136T 34,800 10H1308A 4SHP13LC148T 47,500 10H1309A 4SHP13LC160T 57,000

HEATING BTUH 35,600 44,500 55,500

CIRCUIT AMPACITY 14.2 18.8 21.3

MAX. FUSE AMPS 20 30 35

ON COMPRESSOR

4SHP13LC Series • 3 thru 5 ton cooling

ON PARTS

DIMENSIONS H x W x D CONNECTIONS LIQUID

29-3/4 x 24-3/4 x 26-3/4” 3/8” 37-3/4 x 29-3/8 x 31-1/4” 3/8” 33-3/4 x 29-3/8 x 31-1/4” 3/8”

CONNECTIONS SUCTION 7/8” 7/8” 7/8”

WEIGHT EACH

212 lbs 260 lbs 299 lbs

ACCESSORIES FOR 4SHP13LC SERIES UNITS CAT. NO. MFG. NO. DESCRIPTION

10H818 34M72 10H814 40K58 10H819 45F08

Low Ambient Operation Kit Blower Off Delay Kit

USE WITH EACH All Units All Units

Low Ambient Compressor Cut-off Kit All Units

132

Allied Commercial Heating & Air Conditioning Products are not available at all locations.

AIR CONDITIONING & HEATING EQUIPMENT