Water Switches Safe-T-Switch®

CONDENSATE OVERFLOW SHUT-OFF SWITCH

Condensate overflow shut-off switches detect down stream clogs in condensate drains and

interrupt the thermostat circuit to shut off the unit before flooding occurs. These compact designed switches install in drain lines , or on pan outlets and feature sealed, waterproof magnet/reed switches with no exposed electrical contacts.

SS1 - “T” shaped unit installs in any 3/4” PVC drain, at any down- ward slope from vertical to horizontal, and can be plugged on one side for use on auxiliary pan outlets.Comes with 3/4” plug, bush- ing, and adapter for female threaded pan outlets. Comes pre-wired with 4 foot, 18AWG lead wires. UL listed. 24 volt AC, 1.25 amp switching.

CAT. NO. MFG. NO. DESCRIPTION HG40713 SS1

In line or pan overflow switch

EACH $57.15

AquaGuard

CONDENSATE FLOAT SWITCH SYSTEM

The AquaGuard condensate float switch system can be used in three different applications. It can be used in a horizontal, in-line application, in a vertical in-line application, or connected di- rectly to the secondary overflow fitting in a condensate pan. The AquaGuard switch is located outside normal water flow to allow greater reliability with less exposure to debris, and feature greater sensibility to low volumes of water. Switch wiring approved for plenum use. Shipped complete with in-line cleanout and fittings for all above applications.

CAT. NO. MFG. NO. DESCRIPTION 2R034B

AG-3500 Condensate Float Switch System

EACH $33.60

SS2 CONDENSATE PAN OVERFLOW SWITCH

The “Safe-T-Switch” SS2 is designed to insert into the auxiliary drain pan opening, sense a build up of condensate in the pan, and break a low voltage circuit to the equipment. The “L” shaped switch comes with a male 3/4” threaded adapter for connection to the pan and allow the switch to be mounted to the fitting. 4’ Lead wires.

CAT. NO. MFG. NO. DESCRIPTION HG43394 SS2

EACH Condensate pan overflow switch $24.73

WET SWITCH WATER DETECTOR

The Wet Switch is a solid state device designed to detect the pres- ence of condensate water overflow. The Wet Switch is placed into the secondary drain pan - a normally dry pan. If the primary drain pan fails, condensate water will overflow into the secondary drain pan. Upon sensing moisture, the Wet Switch will open a set of 24 volt contacts which can be wired to turn the cooling unit off. Prevents damage to carpets, walls, woodwork, ceilings and other property.

CAT. NO. MFG. NO. EACH 8G10013

WS-1 $70.27

SS3 CONDENSATE PAN OVERFLOW SWITCH

The “Safe-T-Switch” SS3 is designed to snap onto the lip of condensate drain pans by means of a stainless steel mounting clip. Unique threaded body of the switch allows up/down adjustment of the float depth for universal ap- plication on varied heights of pan lips.

CAT. NO. MFG. NO. DESCRIPTION HG43391 SS3

EACH Condensate pan overflow switch $13.91

Visit us at www.remichel.com

491

HYDRONIC & STEAM SYSTEMS