LEAKATOR® JR. COMBUSTIBLE GAS LEAK DETECTOR

• Automatic Calibration • Micro Processor Controlled Circuitry • Easily Replaced AA-Batteries • Compact Design

• Reliable one button operation

The Leakator Jr. is a handheld combustible gas leak detector used to pinpoint combustible gas leaks in commercial, residential, and industrial applications. These include surveying gas pipelines, inspecting valves, regulators, and meters on gas equipment. When combustible gases are sensed audible and visual indication will be given. Combustible gases include Acetone, Acetylene, Benzene, Butane, Ethanol, Ethylene Oxide, Gasoline, Hexane, Hydrogen, In- dustrial Solvents, Iso-Butane, Methane, Methanol, Paint Thinners, Propane, Natural Gas, and Naptha.

CAT. NO. MFG. NO. DESCRIPTION 2F551

19-7075 SIZE (L x W x D) EACH Combustible gas leak detector * 6 x 2 x 1.5” * Actual size is 6 inches with 12” flexible probe

CAT. NO. MFG. NO. DESCRIPTION 1F282 1F283

13-3000 13-5010

SLING PSYCHROMETER

Built-in scale rule correlates wet and dry bulb thermometer readings to show percent relative humidity at a glance. Built-in water reservoir automatically moistens wick. Thermometers telescope into handle for protection when instrument is carried. Temperature range +20 to +120°F.

CAT. NO. MFG. NO. DESCRIPTION 1F290 1F292

12-7012 12-0011

EACH Sling Psychrometer Wick Replacement Kit, 4 pcs.

$208.85 $41.51

FLORITE® AIR VELOCITY METER

This direct reading instrument has the longest scale of any mechanical air velocity meter. Mod- els 16-7001 and 16-7002 are for measuring airflow through open areas or from flat-surfaced registers.

CAT. NO. MFG. NO. RANGE 1F275

EACH 16-7001 0-1000 ft./min. $885.63

With the gas service calculator you can determine the orifice size needed for fuel gas of any specific gravity and BTU value and for any pre-determined gas input and manifold pressure.

CAT. NO. MFG. NO. DESCRIPTION 1F334

10-0070 Gas Service Calculator

EACH $73.48

GAS SERVICE CALCULATOR EACH

Pocket Draft Gauge Replacement Tube Set

$215.39 $45.86

$378.07

MZF DRAFT GAUGE

A highly sensitive instrument for reading draft remotely from test point. Large, easy-to-read meter with high visibility scale.

Used to measure furnace draft and pressure drop across air filters in residential, commer-

cial and industrial heating plants. Supplied with 5” draft tube and 9 ft. of rubber tubing.

CAT. NO. MFG. NO. DESCRIPTION 2M999 1F281

--- 13-7019

Test Hole Plugs - 1/4” +0.05 to 0 to 0.25”W

EACH $0.46

$424.42

DRAFTRITE® DRAFT GAUGE

Convenient pocket size. Connects to draft point with a 5” sectional metal tube which screws into gauge’s back. Instrument is held in hand for reading draft. Range: 0.14”W up-draft to 0.10”W down-draft. Supplied in leatherette case.

Visit us at www.remichel.com

1039

TOOLS & TEST INSTRUMENTS