GAS FIRED MOBILE HOME FURNACES, DUAL POSITION, DIRECT VENT - 95.5% A.F.U.E.

• Upflow or downflow application. • Quality constructed cabinet. • Easy power and control wiring. • Blower off delay relay. • Self diagnostics.

• Less than 1% airflow leakage. • Direct vent (sealed combustion). • Tubular aluminized steel primary heat exchanger with stainless steel secondary heat exchanger.

ON HEAT EXCHANGER

MG9S Series 60,000 thru 100,00 BTUH

ON ALL PARTS

These category 4 units may be vented through a sidewall, or roof using 2 pipe, or concentric vent- ing in residential mobile home and manufactured housing. Furnaces are factory assembled with wiring and controls for heating, and/or heating-air conditioning applications. Tested to assure de- pendable and economic installation and operation. Furnaces are set up for use with natural gas, LP conversion kit shipped with furnace. Filter is not shipped with, nor can it be installed in the furnace cabinet. Filters must be field installed external to the furnace cabinet. 115 VAC.

CAT. NO. MFG. NO.

5H237B MG9S060B12MP11 60,000 5H238B MG9S080B12MP11 80,000 5H239B MG9S080C16MP11 80,000 5H242B MG9S100C20MP11 100,000

MFG. NO.

MG9S060B12MP11 15 MG9S080B12MP11 15 MG9S080C16MP11 15 MG9S100C20MP11 20

BTU INPUT BTU OUTPUT A.F.U.E.% GAS AMPS EACH 57,000 76,000 76,000 95,000

95.5 95.5 95.5 95.5

Nat/LP 10 Nat/LP 10 Nat/LP 11.5 Nat/LP 17

33 x 17-1/2 x 29-1/2” 33 x 17-1/2 x 29-1/2” 33 x 21 x 29-1/2” 33 x 21 x 29-1/2”

$2,390.49 $2,523.69 $2,573.72 $2,764.79

MAX. FUSE BLOWER MOTOR H/P DIMENSIONS H x W x D SUPPLY W x D RETURN W x D VENT CONNECTION WEIGHT 1/3 1/3 1/2 1

16-3/8 x 20” 16-3/8 x 20” 19-7/8 x 20” 19-7/8 x 20”

16-3/8 x 24-1/4” 2” 16-3/8 x 24-1/4” 2” 19-7/8 x 24-1/4” 2” 19-7/8 x 24-1/4” 2”

122 125 136 145

ACCESSORIES FOR MG9S SERIES UNITS CAT. NO. MFG. NO.

DESCRIPTION

8W610 1CT0302 8W610A 1CT0303 8W610B 1HT0901 8W610C 1HT0902 6W6921 1CB0517 6W6922 1CB0521 6W6923 9255-7171 6W6924 9255-7211 8W611 1NK0301

2” Concentric vent termination - 2 pipe 3” Concentric vent termination - 2 pipe

2” Horizontal sidewall vent termination - 2 pipe 3” Horizontal sidewall vent termination - 2 pipe Combustible floor base kit for 17-1/2” wide furnaces Combustible floor base kit for 21” wide furnaces Bottom return filter rack for 17-1/2” furnaces Bottom return filter rack for 21” wide furnaces Condensate neutralizer kit

5W350R 026-30228-000 Neutralizer refill kit

EACH $84.08

$171.08 $30.40 $25.12

ACCESSORY TERMINAL FEATURES ON EQUIPMENT

Electronic blower control boards # ST9103, ST9120, ST9150, ST9180 and most T.I. boards have terminals to connect an elec- tronic air cleaner to and seperate terminals to connect a humidifier. The “EAC” terminals are energized whenever the blower is energized and the “HUM” terminals are only energized when the blower is energized and furnace is in the heating mode. This feature makes connecting the accessories a “BREEZE”. No additional sail, or pressure switch is required to activate the air cleaner or humidifier.

CAUTION: “EAC” and “HUM” terminals on these boards have limited Amp capacity. Humidifiers and air cleaners which exceed the rating will require an isolating relay be added.

Visit us at www.remichel.com

231

AIR CONDITIONING & HEATING EQUIPMENT