THERMAL SWITCH KIT

Comprised of (2) each 5G3092 (GSK-3) switches and (1) each 6 ft. length of 12 ga. wire, a jumper with spade terminals and (3) each wire clamps.

For 24v use on gas boilers and furnaces. Can be used on sidewall venting applications for additional safety feature. Required by some local jurisdictional codes.

CAT. NO. MFG. NO. EACH 5G3103

SSK-1 $102.98 SPILL SWITCH

Gold contacts manual reset type for use on residen- tial and light commercial millivolt or 24 VAC gas furnaces, boilers and water heaters.

Generally used with sidewall venting applications. TCA-1 thermo- couple adapter required for 30 millivolt applications.

CAT. NO. MFG. NO. EACH 5G3092

GSK-3 $50.71 SWG SUPER LUBE THERMOCOUPLE ADAPTER

Thermocouple adapter for use on 30 millivolt gas thermocouple powered valves. For splicing into thermocouple circuit. TGA-2 is for left hand thread thermocouple applications.

CAT. NO. MFG. NO. EACH 6H206

6H206A

TCA-1 TCA-2

$34.80 $39.91

FLUE SPILLAGE SWITCH

Individual thermally activated switches mount on draft hood and wire into control circuit of gas appliance to detect flue gas spillage.

CAT. NO. MFG. NO. EACH 6H120

FTS-1 $85.49 FLUE GAS SPILLAGE KIT

Provides safety shutdown of gas appliance in the event of flue blockage or power venter fail- ure. Kit contains 2 switches and connector wire.

CAT. NO. DESCRIPTION EACH 6H182

SSK-3 $80.23

REPLACEMENT MOTOR KITS CAT. NO. MFG. NO. DESCRIPTION

EACH

6H090A 6H094B 6H091C 6H091E

46131501 46234800 46234900 46235000

SWG-4 Motor

SWG-4HD Motor SWG-5 Motor SWG-6 Motor

$339.46 $354.42 $557.12 $625.33

VENT HOODS

Designed to perform and built to last. These vent hoods are made of 24 gauge galvanized steel and can be used with natural gas, LP gas or fuel oil fired equipment. Field engineers have de- veloped a vent hood that is the perfect combination of safety, function and

reliability. The concentric pipe, angled outlet deflectors and spaced plate design allow for better heat dissipation. This type of construc- tion minimizes the effects of heat on the outside wall. The angled hood design reduces the effects of wind on the venting system.

The inner and outer pipe are a continuous structure. This allows for easy installation to a power venter or vent pipe and also eliminates possible positive pressure leaks in the wall section. Field Vent Hoods meet the highest standards for safety and reliability.

CAT. NO. DESCRIPTION EACH 6H176 6H177

4” Vent Hood 6” Vent Hood

$224.16 $255.03

This specially designed synthetic lubricant provides quality protection for all SWG power venters and other sleeve bearing motors operating at temperatures from -40° F to 300° F. Adding just 3 to 4 drops per year will increase the life of the motor up to 5 times.

CAT. NO. MFG. NO. CONTAINER SIZE EACH 4G3479

46226200 2 oz. bottle $33.18 FAN PROVER

CAT. NO. MFG. NO. EACH 6H212

46246100 $66.45

“PV” POWER VENTER ACCESSORIES

PPC-4 is a post purge kit for venting combus- tion by-products in oil fired systems after burner shuts down.

WMO-1 is a secondary safety switch for oil fired and LP or natural gas conversions not equipped with a draft hood.

CAT. NO. MFG. NO. DESCRIPTION 5G3095 5G3102

PPC-4 WMO-1

EACH

Post Purge Kit - Thermal Secondary Safety Switch

$316.47 $124.05

Visit us at www.remichel.com

893

AIR HANDLING & VENTING PRODUCTS