HOT SHOT® RETROFIT REFRIGERANT

HOT SHOT® (R-414B) is designed as a di- rect replacement for R-12 and is compatible with all standard refrigerant lubricants. This refrigerant is UL classified, non-toxic and non-flammable (A1/A1). Higher capacity al- lows charging to 80% of R-12 by weight for

similar operating characteristics. Good for low, medium and high temp. applications. This is a zeotropic blend of R-22/R-124/R- 0142b/R-600a (isobutane)

NOTE: DO NOT MIX WITH R-12 as you will contaminate both refrigerants.

Simply empty system and charge with liquid R-414B to desired temp/pressures.(Typically requires approx. 20% less than the rec- ommended charge for R-12).

CAT. NO. CONTAINER SIZE TYPE CONTAINER EACH 10R2223

25 LB 10R2222 10 OZ

Dispos-A-Can Spray Can

$615.76 $33.16

ONE SHOT® RETROFIT REFRIGERANT

THREE CAR PACK OF FITTINGS

Fittings and instructions for using Hot Shot refrigerant in 3 mobile air conditioning systems. Includes 3 ea. high & low side fittings with seal caps (1/4” FFL x 5/8” 18RH), 3 ea.refrigerant ID labels, and a tube of thread sealant.

CAT. NO. MFG. NO. EACH 10R2224 HSAF3

ONE SHOT® (R422C) retrofit refrigerant replaces R-402A, R-402B, R-404A, R- 408A, R-502 and R-507A. Will also replace R-22 in low temperature applications. For low and medium temperature applications. ONE SHOT™ is also compatible with MO,

AB and POE based lubricants, rated zero ozone depletion potential, non-toxic, non-flammable, and can be topped off repeatedly.

CAT. NO. CONTAINER SIZE TYPE CONTAINER EACH 1R0064

24 lb TANK ADAPTER

Tank adapter allows connection to a standard 1/4” MFL and adapts to the R-134A fitting (1/2” ACME) for automotive.

CAT. NO. MFG. NO. EACH 10R2225 HSCTA

NU-22B® RETROFIT REFRIGERANT

VALVE TOOL Valve tool for use with 10 oz. cans.

CAT. NO. MFG. NO. EACH 10R2228 HSVT

$35.17

NU-22B®™ (R-422B) retrofit refrigerant replaces R-22, R-417A and R-407C. De- signed for use with direct expansion systems (TXV’s, Pistons, Cap tubes), not for flooded systems. Closely mimics the operating char- acteristics of R-22. Compatible with MO,

AB and POE based lubricants, rated zero ozone depletion potential, non-toxic and non-flammable.

CAT. NO. CONTAINER SIZE TYPE CONTAINER EACH 1R0065

25 lb Dispos-A-Can $504.06 Dispos-A-Can $515.47

LOW SIDE HOSE ADAPTER

Low side refrigerant hose adapter allows con- nection from Hot Shot low side fitting (HSAF3) to standard 1/4” FFL hose connection. Also used on 25 lb. automotive cylinder (HS25A) or 10 oz. can valve tool (HSVT).

CAT. NO. MFG. NO. EACH 10R2226 HSHA1R $16.37

HIGH SIDE HOSE ADAPTER

High side refrigerant hose adapter allows con- nection from Hot Shot high side (HSAF3) to standard 1/4” FFL hose connection.

CAT. NO. MFG. NO. EACH 10R2227 HSHA2L

648

REFRIGERATION EQUIPMENT & SUPPLIES