System Cleaning & Heat Absorbent

COLD FIRE HEAT TREATMENT PARflush SYSTEM CLEAN-UP KIT

Cold Fire is a safety product developed to rapidly cool hot surfaces and to pre-treat heat sensitive areas. Use for all trade applications that use open flame. Cold Fire can be used to pre-treat surrounding surfaces prior to solder- ing; preventing scortched/burned areas caused by flame impingement. Works well to elimi- nate heat damage to valves and controls and to rapidly cool heated surfaces. Cold Fire is an environmentally friendly, organic wetting agent, biodegradable, non-corrosive and non-staining.

CAT. NO. MFG. NO. DESCRIPTION 1M4512 CF32

EACH 32 oz. Spray Bottle $24.22

The PARflush kit is the first total solution for system clean-up. Specifically developed to assit in HFC conversions (R-410A) and severe compressor burnouts in minimizing costly and frustrating service calls. The kit pairs a pressurized, low boiling point solvent with a patented bi-flow Parker PFD-163S filter drier designed for enhanced filtration capacity. The unique pair provides effec- tive chemistry action and contaminant capture in the filter drier to minimize call back issues. For use in refrigeration, air conditioning and heat pump systems up to 8 tons in capacity.

CAT. NO. MFG. NO. DESCRIPTION 1R1135 PFKIT

1R1136 PF-2 1R1137 PFV-1 1R1138 PFG-1

EACH

PARflush Kit (Includes: PARflush Solvent, PFD-163S Drier, Canister Valve & Hose Gun Assembly) 2 lb. Container of PARflush Solvent Canister Valve

Hose Gun Assembly

CAT. NO. MFG. NO. DESCRIPTION EACH 4X192A 44292

Cool Gel™ HEAT BARRIER SPRAY

Helps prevent heat damage to components and surrounding materials during soldering, brazing and welding. Unique gelling formula sticks to surfaces, without dripping or running off. Clear, non-staining, non-toxic, odorless, harmless to skin, and leaves no residue-eliminating cleanup.

CAT. NO. DESCRIPTION 1M451

32 oz. Spray Bottle

EACH $31.83

THERMO TRAP

A heat absorbing paste designed to isolate heat encountered in soldering, welding and brazing. Prevents damage to nearby controls, seals, fittings, expansion valves, etc.

CAT. NO. MFG. NO. DESCRIPTION EACH 6R169

437138 11 oz. Tube $23.95 12 oz. Spray Can $18.91

FIREBLOCK FOAM SEALANT

FireBlock foam is a polyeurathane foam seal- ant that can be used in place of traditional fireblock materials. Ideal for filling large gaps around vents, pipes and wires. The International Residential Code, Section R602.8 requries fire- blocking in wood frame construction, including around vents, ducts, pipes and wires. the bright orange colored foam expands 2-1/2 to 3 times its dispensed size. Coverage is approx. 520 ft at 3/8” bead. Tack-free in 10 minutes, cures in 12-24 hours depending on temperature.

642

CHEMICALS