OIL FIRED MOBILE HOME FURNACES, DOWNFLOW, SEALED COMBUSTION - 80% A.F.U.E.

The DF Series oil-fired furnace is actually two systems in one. As a powerful air handler, it can handle up to 3 tons of cooling. As an oil-fired furnace, its range of heating capacities makes it a perfect match for the heating requirements of almost any manufactured home. The aluminized steel heat exchanger provides efficient operation and unmatched corrosion resistance.Universal disposable filters clean the air and are easy to replace. Sealed combustion draws in combustion air directly from the outside, providing quiet operation while increasing operating efficiency and reducing cold drafts. All DF Series furnaces require 4000 Series roof jacks for venting and separate 2” PVC combustion air inlet. A molded contoured white upper panel provides an attractive modern appearance and offers a scratch-resistant, durable appliance finish. Zero clearance feature allows these furnaces to be installed where space is a premium.

DF Series ON HEAT EXCHANGER

ON ALL PARTS

The DFAA model features a built-in coil cabinet that is design-matched to work in conjunction with Coleman heat pumps and air conditioners, providing ease of installation and highly efficient operating performance. These models also have blowers capable of handling up to 3 tons of air conditioning. Furnaces shipped with combustion air coupling, clamp and screen; 2 ea. filters (16 x 20 x 1”) and low voltage thermostat.

CAT. NO. MFG. NO.

HEATING CAPACITY - BTUH INPUT

5H236A DFAH066BBSA 66,000 5H234A DFAH084BBSA 84,000 5H233A DFAA066BBTA 66,000 5H235A DFAA084BBTA 84,000

HEATING CAPACITY - BTUH OUTPUT 54,000 69,000 54,000 69,000

A.F.U.E.% CFM @ .50” E.S.P. DIMENSIONS H x W x D WEIGHT EACH

80.0 80.0 80.0 80.0

920

1050 950

1100

59-1/2 x 19-1/2 x 24-3/4” 172 59-1/2 x 19-1/2 x 24-3/4” 183 76 x 19-1/2 x 24-3/4 76 x 19-1/2 x 24-3/4

170 173

$2,146.94 $2,163.57 $2,245.77 $2,263.43

ACCESSORIES

CAT. NO. MFG. NO. DESCRIPTION 5H350

EACH 5H238A 7990-6271 8” Duct Connector

7900-6771 Automatic Damper (Required on A/C Applications) $92.46 $40.07

ROOF JACK SELECTION CHART (all dimensions shown are from the floor to the top side of the roof) TALL 76” FURNACE DFAA & DGAA Roof Jacks Installation Dimensions

CAT. NO. ROOF JACK MODEL # ADJ. HEIGHT EACH 5H244B 4000B7101 5H245B 4000B7121 5H255

4000B7141

5H247B 4000B7151 5H248 5H249 5H256

4000B7171 4000B8161* 4000B8181*

86” to 95” 91” to 102” 99” to 120”

$166.82 $182.61 $213.40

106” to 132” $266.10 143” to 173” $622.52 101” to 145” $279.85 115” to 145” $332.76

* These jacks have removable crowns. SHORT 58” & 60” FURNACE DFAH & DGAH Roof Jacks Installation Dimensions

CAT. NO. ROOF JACK MODEL # ADJ. HEIGHT EACH 5H245B 4000B7121 5H255

4000B7141

5H247B 4000B7151 5H248 5H249 5H256

4000B7171 4000B8161* 4000B8181*

75” to 86” 83” to 104” 90” to 116”

$182.61 $213.40 $266.10

127” to 157” $622.52 85” to 101” 99” to 129”

$279.85 $332.76

* These jacks have removable crowns.

NOTE: It is recommended that the (5H250) 7900-6171(17”) interior extension be used with these models. If used - refer to Tall 76” Roof Jack chart.

ACCESSORIES

CAT. NO. MFG. NO. DESCRIPTION 2M842 --- 5H253 5H250 5H251

232 Sealant (high temperature) for roof jack and pipe joints

4000-4241 Sealant (non-high temperature for roof jack to roof flanges 7900B6171 17” Vent Pipe Extension (optional for all gas and oil furnaces) $87.52 7680B6541 External roof jack for extension - 18”

EACH $10.46 $17.03

$76.82 Coleman Heating & Air Conditioning Products are not available at all locations.

AIR CONDITIONING & HEATING EQUIPMENT