Flux, Solder & Accessories

REGULAR FLUX PASTE

Super detergent action cleans as it solders. For use on copper, brass, galvanized iron, lead, zinc, tin, silver, nickel, mild steel, terne plate and malleable

iron. Water soluble for faster flushing from pipe lines. Contains no zinc chloride. Non-acid, non-toxic, lead free. Meets ASTM B813.

CAT. NO. DESCRIPTION 9K950 9K951

EACH

Regular --- 4 oz. can $8.26 Regular --- 1 lb.. can $21.86

SOLDERLENE® SOLDERING PASTE

Solderlene is a high quality, paste type, non-acid soldering flux. Industrial strength wetting agents to promote solder flow. For use with low and mid-temperature soft solders, both lead and lead-free. Effective on metals except aluminum and magnesium.

CAT. NO. MFG. NO. SIZE EACH 2R211

30004 HEAT SEAL STIK®

One part epoxy, no mixing or measuring needed. Fast repairs com- pleted in 90 seconds. Stick melts, seals and cures in one operation. Used on aluminum, copper and other metals, glass and ceramics. Ideal for use on high and low side of refrigeration systems. Works on R-410A type systems, up to 600 PSI & 350°F.

CAT. NO. DESCRIPTION EACH 9K949

Heat Seal Stik® $30.31

CAT. NO. MFG. NO. DESCRIPTION 7K945

10-800 ALUMINUM FLUX PASTE

Solders aluminum at low temperatures. Also sol- ders copper, chrome, brass and stainless steel. Also works well with tin silver, 96/4, 94/6, 95/5, 60/40, 40/60 and 50/50 solders.

CAT. NO. DESCRIPTION 7K933A

EACH Aluminum Flux Paste, 4 oz. can $22.44 EACH 2 oz. Squeeze Bottle $26.63 FLAME STOP

Flare shield for soldering/brazing. Protects wood, painted or metal surfaces from the heat and flame of a torch. Made from 2300°F material with a heavy flexible foil attached. It can be reused over and over again.

CAT. NO. DESCRIPTION 3X990

EACH 10” x 12” Flame Shield $21.41 4 oz. $9.03 COPPER LOCK

This product requires no soldering to bond copper to fittings. NO SWEAT SOLDERING. Simply apply a small bead of Copper Lock to the fitting and insert copper. The bonding agent sets up in seconds and seals permanently in 5 minutes. With stands tempera- tures from -60 to 300° F, and pressures up to 500 PSI.

Recommended for: Acid, air, alkalines, brine, caustics, gasoline, kerosene, LP gases, oil, refrigerants, solvents, steam and water.

PASTE FLUX

Regular paste flux will not freeze or decom- pose. No odor, lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders.

CAT. NO. SIZE 9K968 9K967

2.0 oz. can 12 1.0 lb.. can ---

CARTON QUANTITY EACH $3.18

$17.55

ABRASIVE SANDING CLOTH/OPEN MESH Regular sandcloth is a sharp aluminum

oxide quality sandcloth with a strong but flexible cloth backing. Is ideal for the preparations of copper tubing and fittings where water and solvents are not a major factor.

CAT. NO. SIZE 9K978 9K979

9K976A THERMO TRAP A heat absorbing paste designed to isolate

heat encountered in soldering, welding and brazing. Prevents damage to nearby controls, seals, fittings, expansion valves, etc. Packaged in 11 oz. plastic tubes.

CAT. NO. MFG. NO. EACH 6R169

437138 $23.95 EACH

1-1/2” x 10 yds - Sand Cloth $7.76 1-1/2” x 25 yds. - Sand Cloth $16.50 1-1/2” x 5 yds. - Open Mesh $11.00

NYLON ABRASIVE PADS

A heavy backing provides aggressive cutting action and long life. Coated surface is an eco- nomical alternative to our fine-quality pad.

Ideal for satin finishing, stainless steel finishes; scuffing surfaces prior to applying adhesives, and removing rust, corrosion and oxides. Completely waterproof.

CAT. NO. SIZE BOX QTY EACH 9K977

4” x 6” 10 $13.04 Visit us at www.remichel.com 951

TOOLS & TEST INSTRUMENTS