Previous Page
RAUPANEL SYSTEM COMPONENTS
CAT. NO. MFG. NO. DESCRIPTION 4W500 235307
RAUPANEL
DIMENSIONS PACKAGE QTY. SQ. FT. PER PIECE WEIGHT EACH 6” x 72” x 0.625” 16
4W502 235327-PLY 6” Plywood Return Bend 8” x 48” x 0.625” 6 4W504 235337-PLY 8” Plywood Return Bend 9” x 48” x 0.625” 6 4W506 235377-PLY 2” Plywood Furring Strip 2” x 48” x 0.625” 25
3.0 2.7 3.0
.045
3.8 lbs 4.0 lbs 4.5 lbs 1.0 lbs
$45.50 $28.03 $24.21 $3.32
Note: Furring strips are to be used in conjunction with 8” return bends to facilitate proper spacing of the RAUPANELs, and to provide a nailing surface for the floor covering.
RAUPANEL INSTALLATION ACCESSORY Use the deburring tool to eliminate burrs and sharp edges after cutting RAUPANEL.
CAT. NO. MFG. NO. DESCRIPTION PACKAGE QTY. WEIGHT EACH 4W508
235387 Deburring Tool 10 0.19 lbs
BRASS HEATING MANIFOLDS PRO-BALANCE®
With Gauges
Delivered pre-assembled and ready to install. Use with 3/8”, 1/2”, 5/8”, and 3/4” RAUPEX pipe. Compatible with manifold valve actuator 260166 (see Thermostats and Manifold Valve Actuators). Order manifold-to-pipe connectors separately (see Manifold Connections and Valves).
Each manifold comes complete with: • 1” NPT supply & return manifold isolation valves with ther- mometer housings (mini-thermometers 250218 sold separately)
• Air vent/fill ports • Visual flow gauges (GPM) on supply side • Circuit balancing/isolation valves on return side • Mounting brackets
CAT. NO. MFG. NO. MANIFOLD STATIONS LENGTH WEIGHT EACH 4W221 4W231 4W241 4W251 4W261
240021 240031 240041 240051 240061
2 3 4 5 6
11.8” 14.0” 16.2” 19.3” 20.0”
COPPER MANIFOLDS
Manifolds are type L copper with open ends, in sizes indicated. Copper outlets are high- temperature brazed (lead-free) into headers. Each manifold is 72” long with 24 outlets at 3” on-center. Manifolds can easily be cut to length. Do not exceed maximum flow rates listed above. Use with REHAU fittings and valves to assemble complete manifolds for heating applications.
250810 250820 250827
8.6 lbs 9.5 lbs
$378.06 $446.03
10.5 lbs $514.09 11.5 lbs $589.71 12.1 lbs $672.85
• Four (4) drywall screws and four (4) self-tapping screws • Maximum flow is 2.0 GPM per circuit; 16 GPM total • Can fit within a 2” x 4” stud wall, only 3-1/4” deep • Can be joined to other manifold sections using 1” BSPP unions (260407)
CAT. NO. MFG. NO. MANIFOLD STATIONS LENGTH WEIGHT EACH 4W271 4W281 4W291 4W292
240071 240081 240091 240101
7 8 9
10
22.2” 24.8” 27.0” 29.2”
13.0 lbs
13.8 lbs $801.47 14.9 lbs
16.0 lbs $945.14 $15.89 4W500 4W506
CAT. NO. MFG. NO. MAX GPM HEADER SIZE OUTLET SIZE PACKAGE QTY. WEIGHT EACH 4W100 4W101 4W103
20 32 32
MANIFOLD HEADER STOCK 1”
1-1/4” 1-1/4”
1/2” 1/2” 3/4”
5 4 4
CAT. NO. MFG. NO. DESCRIPTION 4W105 4W106 4W107
261326 261336 261346
PRE-CUT MANIFOLD STOCK 1” x 1/2” Copper Manifold
1” x 1/2” Copper Manifold 1” x 1/2” Copper Manifold
1” 1” 1”
Note: Additional manifolds thru 2” dia. Tubing available on special order.
CAT. NO. MFG. NO. DESCRIPTION 4W114 4W088
261266 80649004
MANIFOLD MOUNTING BRACKETS Plastic manifold mounting brackets for 1” and 1 ¼” manifolds (pack of 2 brackets)
6.0 lbs 7.3 lbs 7.9 lbs
$219.19 $276.70 $281.38
CIRCUITS HEADER SIZE OUTLET SIZE EACH 2 3 4
1/2” 1/2” 1/2”
$30.42 $35.24 $46.91
EACH $44.23
Metal manifold mounting brackets for 1” and 1 ¼” manifolds (packed each, 2 required) $10.86 Visit us at www.remichel.com 439
HYDRONIC & STEAM SYSTEMS