HYDRONIC AIR HANDLERS

The Rinnai hydronic air handler is designed for operation with the Rinnai tankless gas fired water heaters to provide space heating and domestic hot water. The air handler includes a water coil for hydronic heating and accommodates a cased coil to insure a correct system match for the A/C or HP used. The air handler is multi-position mount, up flow, down flow, horizontal right or left, with side or bottom return air option. Unit is furnished with integral pump, flow sensor for DWH priority, and microprocessor control with auto pre-purge cycle, connections for EAC and HUM, and wiring terminal connections for A/C and heat pump operation. Zero clearance to combustibles on back and sides, front clearance required for service. Water connections 3/4” ID tubing, 115V - 60 cycles.

CAT. NO. MFG. NO. BTU HEATING CFM RANGE AMPS MAX. FUSE WEIGHT EACH 11H2509 AH45 11H2510 AH60 11H2511 AH75 11H2512 AH90

32,000 - 57,000 650 - 800 38,500 - 68,000 650 - 1200

6.3 8.7

15 15

50,000 - 86,500 1000 - 1600 13.7 20 55,000 - 97,500 1200 - 1750 14.3 20

34 x 14 x 22”

34 x 17-1/2 x 22” 34 x 21 x 22”

34 x 24-1/4 x 22”

12” x 18” 16” x 18” 20” x 18” 24” x 18”

92 lbs

17-3/4” x 17-3/4” 17-3/4” x 17-3/4” 17-3/4” x 17-3/4” 17-3/4” x 17-3/4”

$1,688.39

109 lbs $1,890.54 118 lbs $2,104.56 136 lbs $2,378.03

MFG. NO. DIMENSIONS H x W x D SUPPLY OPENING W x D RETURN SIDE D x H RETURN BOTTOM D x W BLOWER HP SPEED AH45 AH60 AH75 AH90

19” x 10-1/2”

19-1/4” x 16-3/4” 19-1/2” x 18-3/4” 19” x 21-1/8”

1/3 1/2 3/4 1

3 3 3 3

CAT. NO. MFG. NO. DESCRIPTION 11H2515 603000015 Side Filter Rack 11H2516 603000011 Bottom filler plate for AH45

ACCESSORIES FOR AH SERIES EACH

11H2514 603000016 Thermostatic Mixing Valve (DWH Priority + Open Loop)

$175.43

$184.30 $66.33

CAT. NO. MFG. NO. DESCRIPTION

11H2517 603000012 Bottom filler plate for AH60 11H2518 603000013 Bottom filler plate for AH75 11H2519 603000014 Bottom filler plate for AH90

EACH $66.33 $69.28 $72.23

11H2513 603000010 Additional Flow Sensor (DWH Priority) $38.35

ENERGYSAVER® DIRECT VENT WALL FURNACES Features...

• Sealed Combustion - protects indoor air quality • Electronic Ignition - no pilot light • Child safety lock

• Flue Block Sensor - furnace automatically shuts down • Digital, Adaptive Control

• On-Board Self Diagnostics - for easier maintenance ON HEAT EXCHANGER

The 431

• 84% AFUE Propane Models • 81% AFUE Natural Gas Models

ON ALL PARTS

As it’s name implies, the EnergySaver® is an energy efficient furnace which saves energy and therefore, saves money! EnergySaver® furnaces have multiple heating capacities and quietly deliver warm air at floor level for draft-free natural circulation. Air for combustion is taken from outside and the flue product is exhausted outside, keeping the room air clean. Rinnai engineers combined a contemporary styled cabinet with such features as a built-in thermostat and humidifier, multi-speed blower, quiet high performance fans, electronic ig- nition to eliminate pilot lights and, on selected models, child safety lock and clogged filter indicator. Venting requires only a 3” hole and all models are easily installed thru walls ranging from 3” thru 23” thick with selected vent kits. They may also be mounted in a different area than the wall vent kit by use of remote vent extension kits. All models: 1/2” gas inlet and 120 volts.

CAT. NO. MFG. NO.

INPUT MAX.

INPUT MIN.

GAS

CFM FAN OUTPUT HI - LOW

11H201 RHFE-431WTA 16,700 8,200 NATURAL 141.3 - 107.4 11H202 RHFE-431WTA 16,700 8,200 LP

141.3 - 107.4 Note: Vent Kit, FOT-151A (4-1/2” - 9-1/2”) is included with unit.

120/60/1 ELECTRICAL SUPPLY WATTS 40 40

MINIMUM CLEARANCE SIDE - TOP - FLOOR 2” - 12” - 0” 2” - 12” - 0”

DIMENSIONS H x W x D WEIGHT EACH

23-13/16 x 29-1/2 x 9-13/16” 51 23-13/16 x 29-1/2 x 9-13/16” 51

$2,158.03 $2,158.03

Visit us at www.remichel.com

293

AIR CONDITIONING & HEATING EQUIPMENT