Hot water radiant baseboard heating comes complete with quick connect fittings to 3/8” Pex pipe, reflecting foils and mounting brackets. Panels are pure white in color.Capacity is 200 BTUH/Ft. @ 180°F EWT.
Inside corner w/bend supports Outside corner w/bend supports Right end cap Left end cap
Panel bracket (spare) White touch up paint (2 fl. oz.)
EACH $14.10 $71.43 $7.98 $9.76 $5.94 $5.94 $7.37
$24.74
INSULATED RADIANT FLOOR PANELS
The Crete-Heat panel system is an easily assembled modular board insulation, vapor barrier and radiant tube holding grid. It allows for simplified installation of hydronic radiant floor heating systems in basements, garages, main floor slab on grade and above grade installations where concrete or gypcrete in normally used. The modular system is designed to cut installation time and manpower requirements. Holds tube in place securely with built in, wide, 3” on center fastners. Strong shiplap interlock panel connections. Standard panels accept ½” and 5/8” pex
Crete-Heat panel - 1’ 25” x 49” Crete-Heat panel – 2” 24” x 48”
Board size: EFFECTIVE AREA Total thickness: THERMAL RESIST Perm Resist: EACH 25” x 49” 24” x 48”
2 1/8” 2 7/8”
R-6 R-10
.51 perms .68 perms
$22.74 $28.29
CONCRETE SLAB INSULATION
REFLECTIX Concrete Slab insulation consists of seven layers. The first layer of white poly is bonded to foil to protect from lime in curing concrete. Each outer layer is bonded to a tough layer of polyethylene for strength. Two inner layer of insulating bubbles re- sist conductive heat flow while a center layer of polyethylene gives REFLECTIX high reliability and added strength. Use for insula- tion (and moisture/radon retarder) under a concrete slab, insulation under a radiant floor system or snow melt system (in a slab).
CAT. NO. MFG. NO. 7H392 DBWEF48125 48” X 125’ roll R-1.1
DIMENSIONS THERMAL RESIST WATER VAPOR TRANS MOLD & MILDEW NOMINAL THICKNESS EACH 0.02 Perms