Provides ambient temperature-controlled lockout at auxiliary electric heaters when
outdoor temperature is mild. Features an integral bracket for mounting inside the cabinet of outdoor heat pump section, and 48” capillary. Adjustable range with 6” fixed differential. Electrical rating: 10A at 120v AC, 6A at 240v AC. Dimensions: 1-1/4” high, 3-1/2” wide (to mounting centers), 2-1/2” deep. Bulb size: 3-3/4” long, 3/8” diameter.
CAT. NO. MFG. NO. RANGE 3C064
2B61-186 0 to 50°F
EACH $90.49
UNIVERSAL REPLACEMENT OIL BURNER CONTROLS
Unusually compact size primary unit mounts on standard 4” x 4” junction box. Use with 956 “cad cell” type flame detector (not included) that gives
fast, reliable response to flame ignition or extinction. Recycles on power failure. Flame or ignition failure will cause safety shutdown and control must be manually reset to again start burner.
“Solid state” detection circuit with no moving parts not only means faster response to cad-cell but eliminates service callbacks. Thermostat current .4 amp. Electrical rating 10.0 amp at 120v AC. Order 956 flame detector separately.
5D51 Series UNIVERSAL
FAN AND LIMIT CONTROL
Single element type --- regulates fan or blower operation and acts as high limit safety control. Snap-Action switches give positive “on-off” con- tact action. Dial has individual pointers for quick adjustments of cut-in and cut-out settings.
Has manual fan switch. Fan range 50-265°F with a 15-50° adjust- able differential. Limit range 100-300°F with a 25°F fixed dif- ferential.
CAT. NO. MFG. NO. INSERTION EACH 5G084
5D51-78 11” $130.17 956 Series OIL FLAME DETECTOR
A special “cad cell” that responds only to the radiant rays of the oil flame. Makes an electrical circuit when it “sees” flame, breaks the circuit upon absence of flame.
For 24v AC control of blowers and other line volt- age loads on heating, cooling or heating/cooling systems where 24v power supply is already avail- able. Compact size, 1/2” conduit hub permits mounting to standard junction box. Permits control of single or two speed fan motor.
Dimensions: 2-11/16”H x 12-15/16”W x 1-1/2”D. Contact rating: BLK-Red (NO) 16 amps @120v AC; BLK-BRN (NC) 9.8 amps @120v AC.
CAT. NO. MFG. NO. CONTACTS COIL VOLTAGE EACH 5G099
8A04-1 SPDT 24 $79.18
668-451 Series INTERMITTENT IGNITION OIL BURNER CONTROL
For use with 956 flame detector to provide safe operation for oil burners where ignition during the entire burner cycle is desired. Capable of power-
ing external cooling loads up to 40va. Safety timing 45 seconds. Thermostat current .4 amp. Electrical rating: 10.0 amps @ 120v AC. Order 956 flame detector separately.