EMS MATERIALS SCIENCE & METROLOGY CATALOG 2019–20 EDITION Specimen Holders (continued) / FIB HOLDERS
SEM SUPPLIES Small FIB Grid Holder
Holds up to 2 FIB grids of the same thickness. Handy FIB grid holder on a standard 12.7mm (1/2") pin stub. Can also be used to safely store FIB grids with thin sections attached. Includes Philips screwdriver #0.
Overall Dimensions Pin
Material Cat. #
75950-02 Description Small FIB Grid Holder, 12.7mm, Pin
12.7mm (1/2") x 7.8mm (0.3mm) H w/o pin. Standard 3.2mm (1/8").
Vacuum grade aluminum with brass screw. Qty each
Single 1/2" FIB Sample and Grid Holder Holds a FIB sample mounted on standard 1/2" (12.7mm) pin stub for FIB milling and lift-out procedures. Conveniently holds two FIB grids close to the sample to mount prepared TEM lamellae on the FIB grid for TEM imaging. Cost-effective holder suitable for all FIB/SEM systems which accept pin mount holders, including the FEI, ZEISS and Tescan systems. For the JEOL and Hitachi systems, use a pin mount adapter. Includes Philips screwdriver #0.
Overall Dimensions Pin
Material Cat. #
75950-03 Description Single 1/2" FIB Sample and Grid Holder, Pin
Double 1/2" FIB Sample and Grid Holder
Holds FIB samples mounted on two standard 1/2" (12.7mm) pin stubs for FIB milling and lift-out procedures. Conveniently holds two FIB grids close to the sample to mount prepared TEM
lamellae on the FIB grid for TEM imaging. Cost-effective holder suitable for all FIB/SEM systems which accept pin mount holders, including the FEI, ZEISS and Tescan systems. For the JEOL and Hitachi systems, use a pin mount adapter. Includes Philips screwdriver #0. 36.5 x 12.7 x 11.6mm (1.44" x 0.5" x 0.46").
Overall Dimensions Pin
Material Cat. #
75950-04 Description Double 1/2" FIB Sample and Grid Holder, Pin Multiple FIB Grid Holder
Larger size enables this FIB grid holder to handle multiple FIB grids of the same thickness. Can also be used to safely store FIB grids with thin section (lamellae) attached. Convenient brass thumbscrews make loading and unloading easy.
Overall Dimensions Pin
Material Cat. #
75950-05 Description Multiple FIB Grid Holder
22.5 x 29 x 13.5mm (7/8" x 1-1/8" x 5/8"). Standard 3.2mm (1/8").
Vacuum grade aluminum with brass screw. Qty each
1" FIB Sample and Grid Holder Holds an FIB sample mounted on a standard 25mm (1") pin stub for FIB milling and lift out procedures. Can also be used to hold FIB grids of the same thickness to mount the prepared lamellae on an FIB grid for TEM imaging. This cost-effective and versatile holder is suitable for all FIB/SEM systems which accept pin mount holders, including the FEI, ZEISS and Tescan systems. For the JEOL and Hitachi systems, use a pin mount adapter. Convenient brass thumbscrews make loading and unloading easy.
Overall Dimensions Pin
Material Cat. #
75950-06 50 Description
50 x 29 x 13.5mm (2" x 1-1/8" x 5/8"). Standard 3.2mm (1/8").
Vacuum grade aluminum with brass screw. Qty
1" FIB Sample and Grid Holder, Pin each
Fortress™ FIB Holder – High Profile High Profile Fortress™ FIB Holder to hold a standard FIB lift-out
specimen on a grid.
Fortress™ Sample Loader Securely holds the Fortress™
Cat. #
75957-01 75957-50
Description
FIB sample Holder – High Profile Fortress™
High Profile holder under a
stereomicroscope and permits viewing from 2 angles without changing focus on the microscope.
Qty. each
Sample Loader for High Profile each Standard 3.2mm (1/8"). Vacuum grade aluminum with brass screw. Qty each
Fortress™ FIB Holder – Low Profile Low Profile Fortress™ FIB Holder to hold either a standard FIB lift out specimen on a grid or an H-Bar cut Sample.
Fortress™ Sample Loader
Securely holds the Fortress™ Low Profile holder under a stereomicroscope and permits viewing from 2 angles without changing focus on the microscope.
Cat. #
75956-01 75956-50
Description FIB sample Holder for Low Profile
Qty. each
Fortress™ Sample Loader for Low Profile each
22.4 x 12.7 x 11.7mm (0.88" x 0.5" x 0.46"). Standard 3.2mm (1/8").
Vacuum grade aluminum with brass screw. Qty each FIB Sample Holders
Fortress™ FIB Holder with CastleGuard™ Protection Fortress™
FIB Holders are reusable holders that secure FIB sample that are held in a specific orientation without the use of adhesives, adhesive tabs, or conductive paints. Fortress™
FIB Holders can be
used to position a thin, whole or cut TEM grid/disk in an orientation such that either in-situ or an ex-situ. FIB lift-out technique can be used to attach a FIB-prepared sample. Physical protection of the mounted sample on the grid is provided with the CastleGuard™ protection design. Up to 30 Fortress FIB Holders can be stored in a single SS200 Sample Saver™
storage container.
Unique clamping mechanism secures sample without over tightening
Standard 1 ⁄8 " pin mount fits most FIBs and SEMs
Peripheral support structure protects specimens during handling and transport
Economical design enables user to prepare and store samples on the same holder
Compatible with Sample Saver™
Storage
containers for secure storage and transport in an inert environment
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156 |
Page 157 |
Page 158 |
Page 159 |
Page 160 |
Page 161 |
Page 162 |
Page 163 |
Page 164 |
Page 165 |
Page 166 |
Page 167 |
Page 168 |
Page 169 |
Page 170 |
Page 171 |
Page 172 |
Page 173 |
Page 174 |
Page 175 |
Page 176 |
Page 177 |
Page 178 |
Page 179 |
Page 180 |
Page 181 |
Page 182 |
Page 183 |
Page 184 |
Page 185 |
Page 186 |
Page 187 |
Page 188 |
Page 189 |
Page 190 |
Page 191 |
Page 192 |
Page 193 |
Page 194 |
Page 195 |
Page 196 |
Page 197 |
Page 198 |
Page 199 |
Page 200 |
Page 201 |
Page 202 |
Page 203 |
Page 204 |
Page 205 |
Page 206 |
Page 207 |
Page 208 |
Page 209 |
Page 210 |
Page 211 |
Page 212 |
Page 213 |
Page 214 |
Page 215 |
Page 216 |
Page 217
