94 FORMULATIONS Suppliers
1 The Lubrizol Corporation 2 The Dow Chemical Co 3 Ashland Inc 4 Remet Corporation 5 Floratech 6 Angus Chemical Company
FLORATECH Brilliantly Clear Hair Gel PHASE INGREDIENTS
ISD V B Gransurf 671 C Unipure Red INCI NAME A Deionised Water Water
Carbopol® Ultrez Acrylates/C10-30 Alkyl Acrylate 21 Polymer1
Crosspolymer
B Deionised Water Water Florasolvs®
PEG-150 Hydrogenated Jojoba2
C Floraesters K-20W Hydrolyzed Jojoba Esters (and) Water Jojoba3
(Aqua) Solubilisant LRI4 Ethanol Sol. 3,
UN 1170, PG II, SDA 40-2, 200 Proof5
D PVP/VA W-7356 E Colour Procedure
Disperse the Carbopol Ultrez 21 Polymer into the deionized water at room temperature. Allow sufficient time for complete hydration of the Carbopol Ultrez 21 Polymer.
Heat the deionised water of phase B to 65˚C and add the Florasolvs PEG-150 Hydrogenated Jojoba with stirring until dissolved. At room temperature, dissolve the Floraesters K-20W Jojoba in the Ethanol Solutions 3, UN 1170, PG II, SDA 40-2, 200 Proof. Once dissolved, add the Solubilisant LRI to this mixture. Dilute the PVP/VA W-735 with the deionised water listed in phase D at room temperature.
Neutralise phase A with phase C. With complete mixing, pour phase C into phase A at a very slow pace (Avoid adding too quickly or the gel may form white agglomerates). Allow time for complete mixing until it becomes a clear gel.
Add phase B to phase AC with sweep action mixing at room temperature. Add phase D to phase ABC with sweep action mixing at room temperature. Slowly add phase E to phase ABCD with sweep action mixing at room temperature. Properties pH: 5.0-6.0 Viscosity: ≥120,000 cP Suppliers
1 The Lubrizol Corporation 2 The HallStar Company 3 Floratech 4 Sensient Cosmetic Technologies 6 International Specialty Products
5 Remet Corporation
GRANT INDUSTRIES Long Lasting Liquid Lip Revolution PHASE INGREDIENTS A Creasil ID Granresin PMSQ-ID1 Granresin MQI-24501 Bentone Gel
INCI Isododecane
Polymethylsilsesquioxane and Isododecane
Isododecane and C24-28
Alkyldimethylsiloxy Trimethylsiloxysilicate Isododecane and Disteardimonium
PERSONAL CARE ASIA PACIFIC VP/VA Copolymer Deionised Water Water Colour Preservative
5.00 5.00
qs qs
PPG-26-Buteth-26 (and) PEG-40 Hydrogenated Castor Oil Alcohol Denat.
3.00 6.00 4.00 Jojoba Oil PEG-150 Esters
16.60 1.00
h014 % W/W
qs 0.50
LC3071 Kaolin
Dry Flo PC Silver 2800 Reflecks
Dimensions
Glittering Red G430S Aerosil 200
Hectorite and Propylene Carbonate PEG-10 Dimethicone CI 15850 and Aluminum Hydroxide Kaolin
Aluminum Starch Octenylsuccinate Mica
Calcium Sodium Borosilicate and Titanium Dioxide
Silica D Deionised Water Water
E Phenoxyethanol Phenoxyethanol Procedure
3.00 3.60
3.40 5.00 4.10 2.00
1.50 16.00 0.60
Combine phase A in the main kettle, equipped with a propeller mixer. Mix until uniform. Add phase B to main kettle and mix until uniform. Add phase C to main kettle in the order shown while mixing. Allow each powder to fully disperse/develop between each addition. Mix until uniform. Add phase D to main kettle while mixing. Mix until uniform. Add phase E to main kettle while mixing. Mix until uniform. Supplier
1 Grant Industries
JEEN INTERNATIONAL Mousse Foundation PHASE INGREDIENTS A Di Water Jeesilc®
INCI NAME Distilled Water DMC 19-31 B Jeesperse
CPW-2-PS111 BYO-IIS22
BRO-IIS22 BBO-11S22 BTD-IIS22 PEG-12 Dimethicone
Polyethylene, Sodium Polyacrylate, Polysilicone-110
Yellow Iron Oxide and Triethoxycaprylylsilane Red Iron Oxide and Triethoxycaprylylsilane Black Iron Oxide and Triethoxycaprylylsilane Titanium Dioxide and Triethoxycaprylylsilane
C Glycerin 99.7% Glycerin USP1
PVPK-303
Mica BC WG4 Sp-5002
Jeecide® CAP-51
Polyvinylpyrrolidone (PVP) Mica
Nylon 12 Phenoxyethanol, Caprylyl Glycol,
Potassium Sorbate, Water, Hexylene Glycol
Procedure
Mix phase A at room temperature. Blend all powders from the phase B in an Osteriser and mix on high for 5 minutes.
no. G105-169.01 %
6.30 20.50 20.50 13.50
Add phase B into phase A and mix until homogenous. Add phase C and mix till uniform. Properties pH: 6.0-6.5 Initial Viscosity: 500,000-700,000 cps (spindle 95 @ 0.5 rpm) 24 hour Viscosity: 1,000,000-1,500,000 cps (spindle 96 @ 0.5 rpm) Suppliers 1 Jeen international 2 Kobo 3 ISP 4 Presperse
November 2017
J26-70 % W/W
67.80 1.70
4.0 1.78 0.12 0.01 14.091
4.00
3.00 2.00 1.00 0.50
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96
