118 FORMULATIONS
Sodium Hydroxide 30%
E Fruitliquid™ Kumquat (Glycerin (and) Water (and) Citrus Japonica Fruit Extract)3
F Evermat™ G Crystalide™ H Moonshine®
Red Violet Blue Ultra Sparkle (Calcium
Sodium Borosilicate (and) Amorphous Silica (and) Titanium Dioxide (and) Tin Oxide)1
Procedure Weigh Part A and mix with gentle helix stirring (s=300 rpm). Weigh and mix Part B. Pour Part B into Part A with helix stirring (s=500 rpm). Weigh and mix Part C. Add Part C into Part A+B, stir well. Adjust pH above 6.20 with Part D, mix well. Weigh and add Part E to the previous part, stir well. Weigh and add Part F to the previous part, mix well. Add Part G, mix well. Add Part H, mix well. Suppliers 1 Croda 2: Sederma 3 Crodarom 4 Firmenich
SCHILL & SEILACHER Toothpaste “Fresh Breath” PHASE INGREDIENTS
A B C Perlastan L-301 Polyfix ZRC 25 GP1 D E F G Procedure
Mix Part A in listed order and heat up to 70°C Maintain temperature and add Part B while stirring Mix until preparation appears homogeneous. Cool down to room temperature while stirring. Add Part C in listed order. Mix Part D until homogeneous and add while stirring Add Part E. Adjust pH-value with Part F. Add Part G. Properties
Appearance: white cream pH-value: 6.8 – 7.3 Suppliers
1 Schill+Seilacher GmbH
TRI-K Skin Perfecting & Correcting Serum PHASE INGREDIENTS A Water
INCI NAME Water
VERSENE™ Na2 Disodium EDTA
Crystals1 Natrosol™
250 HHR CS2 VANZAN® Zemea®
Propanediol4 B TRlstat E5 NaturePep® Procedure
Heat water to 60°C, dissolve Disodium EDTA. Disperse remaining ingredients of Phase A, one at a time until fully hydrated and uniform. Mix for minimum of 60 minutes. Add Phase B ingredients one at a time at or below 40°C. Cool batch to 30°C. Suppliers
PERSONAL CARE ASIA PACIFIC Pea5
Benzyl Alcohol, Water, Potassium Sorbate, Sodium Benzoate Pisum Sativum (Pea) Extract
1.00 3.00 NF-C3 Hydroxyethylcellulose
Xanthan Gum Propanediol
0.20 1.00
2.00 3.00 0.10
1 The Dow Chemical Company 2 Ashland Specialty Ingredients 3 R.T. Vanderbilt Holding Company 4 DuPont Tate & Lyle Bio Products Company, LLC
5 TRI-K Industries, Inc.
UNIVAR Nude Skin Oil-in-Milk Make-Up Remover PHASE INGREDIENTS A
INCI NAME Water (Aqua)1
ACULYN™ 28 Polymer2 AMPD®
B C EMANON® EV-E4 Dow Corning®
ES-5373 Formulation AID5 Dow Corning®
INCI NAME Aqua
Glycerin Sorbitol
Carboxymethyl Cellulose GLDA, 47 %
Sodium Saccharin
Sodium Lauroyl Sarcosinate, 30 % Zinc Ricinoleate, Tetrasodium Glutamate Diacetate, Propanediol Aqua
Titanium Dioxide
Hydrated Silica, abrasive Hydrated Silica, thickener Citric Acid
Preservatives, Fragrances etc.
% W/W 52.95 7.50
14.20 0.45 0.10 0.50 1.50 1.00
4.80 1.00 5.50
10.50
q.s. to pH: 6.8-7.3 q.s.
FZ-31965 Primol™ 3526 Radia 77307
D Kem EHG9 Coton Blanc SY15324710
Ultra PC3
Acrylates/Beheneth-25 Methacrylate Copolymer Aminomethyl Propanediol Allantoin1 Glycerin1
Glycereth-7 Caprylate/ Caprate PEG-12 Dimethicone
Caprylyl Methicone
Paraffinum liquidum Isopropylmyristate 98%
Syntapharm Cera microcristallina (and) Paraffinum Lavable 440 L8
liquidum (and) C12-C13 Pareth-4 Phenoxyethanol, Ethylhexylglycerin Fragrance
Procedure Add the ACULYN™ 28 Polymer to water and neutralize with AMPD®
FR2317 4 % W/W q.s. 1.0
q.s. pH 6.5 0.3 3.0 0.5 4.0
15.0
18.0 10.0 2.0
0.3 0.3
ULTRA
PC. Add phase B in order. Heat and mix phase C to 65°C and add it slowly to phase AB with high shear. Add preservative and fragrance Properties
Stable at 4°C, room temperature and 40°C. pH : 7.31 Viscosity (spindle 6 ; 10 rpm ; 1 min) = 11 250 cPs Suppliers 1 Univar 2 Dow Personal Care / Univar 3 ANGUS®
/ Univar
4 Kao Chemicals Europe / Univar 5 Dow Corning / Univar 6 ExxonMobil / Univar 7 Oléon / Univar 8 Aiglon Groupe / Univar 9 Akema / Univar 10 Kao Fragrances / Univar
VARIATI Green Natural Shampoo PHASE INGREDIENTS
SG 3-67 % W/W
92.25 0.05
0.40
0.30 3.00
1216G1
INCI NAME
A Demineralized Aqua water
Gluconolattone Gluconolactone Sulfopon®
B Plantacare®
818UP1 Lamesoft®1
C Avogelia® Profumo D Cressatine®3
Aqua, Glycerin, Nasturtium Officinale Extract, Tropaeolum Majus Extract
E Sodium Chloride Sodium Chloride Preservatives
DS2
Sodium Coco-Sulfate Coco-Glucoside
Coco-Glucoside, Glyceryl Oleate Aqua, Sodium Cocoyl Amino Acids, Glycerin
09-TE-05-18 % W/W q.s
1.5 7.2 12
2 5
0.2 1
1.5
Procedure Combine ingredients of phase A, heating to 45-50°C. Combine ingredients of phase B, heating to 45-50°C. Add phase B to phase A. Combine ingredients of phase C. Add phase C to phase A+B. Add phase D and E. Add preservatives. Properties
pH: 4.80 – 5.20 Viscosity (Fungilab R3, rpm 30, 25°C): 2600 - 2800 mPa*s Suppliers 1 Basf 2 Variati
3 Solabia November 2019
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120
