Page 42
www.us-tech.com
March, 2018
MicroCare Offers High-Performance Cleaning Solutions
New Britain, CT — MicroCare is now offering a family of critical cleaning products, including the latest Tergo™ high-performance flux remover. With more stringent regulatory
requirements and environmental ex- pectations imposed on companies, Tergo high-performance flux re- mover is an important innovation for industry. It is already receiving very positive feedback from many indus- tries, not only for its effective clean- ing, but also for its impressive envi- ronmental qualities. The product is a unique, non-
EcoStrip 9380 Welcome to the Future of Entry Level Cut & Strip
The EcoStrip 9380 offers the most complete feature set at an economical price
To Be Precise. See at APEX, Booth 3033
flammable cleaning chemistry specif- ically engineered to clean challeng- ing high-temperature solder pastes and flux residues, including water- soluble (OA) fluxes. It has the added benefit of removing stubborn white residues from lead-free PCBs. Tergo high-performance flux remover can also be used as a degreaser and even removes slight oxidation and tarnish from finished surfaces. MicroCare’s Tergo products
have excellent toxicity profiles for a low global warming impact and REACH/RoHS compliance, while some are even VOC-free. Because the flux remover is
compatible with traditional vapor de- greasing procedures, it can easily be
Tergo high-performance flux remover.
used as an alternative for chemistries that are being phased- out under environmental, health,
safety or economic pressures. Contact: MicroCare Corp., 595
John Downey Drive, New Britain, CT 06051 % 860-827-0626 E-mail:
support@microcare.com Web:
www.microcare.com
See at IPC APEX, Booth 2909
FKN Systek Intros Singulator for Tab-Routed PCBs
Millis, MA — Singulating tab-routed PCBs in low-to-medium volume pro- duction quantities is safe and easy with the N100 Nibbler from FKN Sys- tek. Blades are available in standard thicknesses of 0.12, 0.093 and 0.062 in. (3, 2.4 and 1.6 mm). Custom sizes to match the width of the routed sec- tion can be ground. Tabs are cut
Intelligent Dry Storage™ Tab-routed PCB.
the panel is not pressed between two points during the cut. The N100 is provided with a
quick-connect pneumatic port that plugs directly into factory air (80 to 100 psi). Stepping on a foot pedal ac- tivates the cutting process. The ex- cess material from the tab is stored inside a compartment of the tool and can be easily removed. The Sharp Blade support dies of
Fast Recovery Time <3 minutes provides constant access to stored parts.
Industry 4.0 Ready all SmartDRY™
SmartBAKE™ Mode (SD-10 only) manually set temperature, humidity
1.800.323.4548 |
www.smartdry.com MADE IN USA See at APEX, Booth 1036
the N100 provide clean shearing ac- tion, excellent for singulating one tab at a time on flex circuit boards. This is a good tool for low-volume singula- tion of a variety of flex circuit and standard PCBs, built on a rectangu-
lar platform. Contact: FKN Systek, 115
Pleasant Street, Millis, MA 02054 % 508-376-2500 fax: 508-376-2505
E-mail:
fkn@fknsystek.com Web:
www.fknsystek.com
See at IPC APEX, Booth 2922
cleanly on each side so that no further cleanup is required to remove excess material, as is often the case when using hand tools or when breaking panels manually. Since only one tab is cut at a time, minimal stress is exert- ed on the board during the process, as
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136
