Page 130
www.us-tech.com
March, 2018 DELO Offers Adhesives for Display Bonding
Sudbury, MA — DELO is now offering two reliable adhesives that are suitable for bonding display frames and cover glass. They can also be used for joining a display panel to a housing. DELO PHO- TOBOND LA4860 is a one-component, light-acti- vated urethane polymer adhesive and DELO-PUR SJ9356 is a two-component, polyurethane hybrid adhesive.
DELO PHOTOBOND LA4860 is a modified
urethane polymer that contains a light-activated curing mechanism with subsequent humidity cur- ing. The adhesive begins to cure once it is exposed to UV or visible light, following dispensing, and before joining the components. The curing takes place at room temperature and ambient humidity after joining. Due to its curing mechanism, opaque compo-
nents, such as display frames, which often have a black mask on the edge of areas or are bonded to the housings, can be quickly and reliably joined, without the need for additional heat curing. Initial strength is reached after a few min-
utes. The time can be further reduced if the fillet created during joining is exposed to light again for a short period of time. Achieving prefixation in sec- onds accelerates the production process and is an advantage when the adhesive is being used for sealing, coating, potting, or encapsulating. DELO-PUR SJ9356 is a two-component poly -
urethane-based adhesive that is free of isocyanates and silicones. It cures at room temperature and reaches initial strength after approximately four hours. The solvent-free adhesive can be used at temperatures ranging from –40 to +230°F (–40 to +110°C). It also exhibits good tension-equalizing char acteristics with an elongation at tear of 350 percent.
DELO’s new adhesives are aimed at display and cover glass bonding applications.
This flexible adhesive ensures stable and ten-
sion-equalizing bonds and seals, even with chang- ing loads. Its flow resistance and excellent wet adhesion make it excel- lent for sealing gaps larger than 0.08 in. (2 mm) and protecting compo- nents from humidity and dust. DELO-PUR SJ9356 is packaged
in hobbocks. For easier handling, it is also available in double-chamber car- tridges. This two-component adhe- sive can be used in a temperature range of –40 to +221°F (–40 to +105°C) and has an elongation at
Organize and take control of your documents
YUDU’s mobile Document Center App can provide employees and customers with a single destination from which to access brochures and catalogs to user manuals and datasheets.
tear of 120 percent. Contact: DELO Industrial
Adhesives, LLC, 144 North Road, Suite 2650, Sudbury, MA 01776 % 978-254-5275 E-mail:
info@delo.us Web:
www.delo-adhesives.com
Fairview Debuts 40 to 110 GHz End Launch
Connectors
Allen, TX — Fairview Microwave has released a new line of high-speed end launch connectors. These are designed for signal integrity measurements, chip evaluations, coplanar waveguide, 25 Gb Ethernet, SERDES, substrate characterization, and test fixture applications. Fairview’s new line of high-
Can sit across iOS, Android and Windows devices for full platform ubiquity
Properly categorize all of your content, from brochures and catalogs to user manuals.
Tight version control, so that older documentation is never presented to users of the app.
speed end launch connectors is com- prised of four models that provide VSWR as low as 1.10:1 and a maxi- mum operating frequency of 40 to 110 GHz, depending on the model. These connectors are reusable, do not require any soldering and have a compact profile with a 0.35 in. (8.9 mm) mounting width and a 0.005 in. (0.13 mm) launch pin. They have an outer conductor made of stainless steel and a gold-plated beryllium
Provide a truly responsive, smartphone friendly viewing mode for smartphone users, called PhoneView.
Permission management to make sure you can control
who sees what documents. For more information
888 367 9838
Enhanced search options for easy discoverability among readers.
Millimeter-wave end launch connectors.
copper center contact. These end launch connectors are suited for high-speed digital and millimeter-
wave system development. Contact: Fairview Microwave,
Inc., 1130 Junction Drive, Suite 100, Allen, TX 75013 %972-649-6678 Web: https://www.fairviewmi-
crowave.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136
