February, 2017
www.us-
tech.com
Page 31 Renishaw Unveils Multi-Axis Calibrator
Hoffman Estates, IL — Renishaw’s new XM-60 multi-axis calibrator is capable of measuring all six degrees of freedom from a single setup and in any orientation for linear axes. The XM-60 is designed to offer significant improvements over conventional laser measurement techniques. As demands on component toler-
ances increase, manufacturers are now required to consider all error sources from the machines producing parts — angular errors as well as lin- ear and straightness errors. The cali- brator captures all these errors in a single setup. Designed for the machine
New Positive Displacement PC Pump from Techcon
Cypress, CA — Techcon Systems, a product group of OK International, has introduced its TS8100 series pos- itive displacement PC (progressive cavity) pump, along with a series of benchtop robotic systems. The continuously volumetric
dispense pump’s dispensing technol- ogy enables accuracy and repeatabil-
tool market, the XM-60 multi-axis cal- ibrator complements Renishaw’s cali- bration product line that includes the XL-80 laser system, XR20-W rotary axis calibrator and QC20-W wireless ballbar. The XM-60 uses the XC-80 en- vironmental compensator to correct for environmental conditions. The calibrator provides an accu-
rate laser system that incorporates special technology with a patented op- tical roll measurement and fiber optic launch system. The compact launch unit is remote from the laser unit, re- ducing heat effects at the point of measurement. It can be mounted di- rectly to the machine on its side, up- side down and even on its back, which is particularly beneficial in areas with
difficult machine access. Reducing uncertainties of meas-
urement is paramount for any user. The XM-60 has been designed to measure machine errors directly, re-
machine adjustments a quick and simple task with the user’s existing XL-80 measurement part programs. The receiver is wireless and
powered by rechargeable batteries, avoiding trailing cables during ma- chine moves that could cause inaccu- racies or break the laser beam during measurement. The performance of each calibrator is traceable to inter- national standards and each unit is
XM-60 multi-axis calibrator.
ducing the inaccuracies that can re- sult from complex mathematics used in some alternative measurement techniques. Direct measurement makes comparison before and after
Don’t Sacrifice Speed for Accuracy...
Programmable Tilt + Rotate
enables dispensing into tight locations and around tall components
TS8100 dispensing system.
ity of ±1 percent. The turning rotor on the TS8100 moves the fluid in tightly sealed cavities through the stator’s fluid chambers to create a volumetric fluid flow that does not change the shape or size of the fluid. The TS8100 comes standard
with a syringe bracket, mounting bracket kit, luer lock fitting, cleaning kit, and dispensing tip selection pack. Typical applications include under- filling PCB components, encapsula- tion and potting applications, apply- ing lubrication on automotive parts, and dispensing pastes and flux. The TSR2000 benchtop robot
series has been designed for a wide range of fluid dispensing applica- tions, from in-line to batch. The ver- satile dispensing platforms deliver consistent, high-performance dis- pensing results at an affordable price. The series is suitable for appli- cations including solder paste dot dispensing, form-in-place gaskets, filling, potting, encapsulation, bond- ing, and coating. Three models are available to accommodate a wide
range of working envelopes. Contact: Techcon Systems,
10800 Valley View Street, Cypress, CA 90630 % 714-230-2398 E-mail:
jsimmons@okinternational.com Web:
www.techcon.com
See at IPC APEX, Booth 1500 See at APEX, Booth 1611
Dual-valve capabilities: dual-action or dual
simultaneous dispensing
or Accuracy for Speed!
WATCH THE VIDEO
certified before shipment. Contact: Renishaw, Inc., 5277
Trillium Boulevard, Hoffman Es- tates, IL 60192 % 847-286-9953 E-mail:
jeffrey.seliga@
renishaw.com Web:
www.renishaw.com
See at ATX/MD&M West, Booth 4439
Nordson ASYMTEK’s award-winning Spectrum™
II dispensing platform
sets the standard for high speed and accuracy in precision dispensing applications for microelectronics, semiconductor, MEMS, and manufacturing applications. And its small footprint delivers maximum productivity with minimum manufacturing floor space.
Spectrum II features:
accuracy in X, Y and Z axes
closed-loop process controls
dispensing experts
www.nordsonasymtek.com/S2
NPI Award inn
W er!
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124