106 FORMULATIONS
Viscosity: 10,000-30,000 cP (No.4-sp12) Stability: Passed 3 months at Room Temperature and 40°C, 1 month at 50°C and cycle test (0-20-40°Cx2days) Packaging: Pack in airless packaging is recommended Suppliers 1 Croda
2 Schulke 3 Daito Kase Kogyo
ELEMENTIS Gone With The Wrinkles PHASE INGREDIENTS/INCI NAME A Dimethicone (KF-96L-2cs)1
Cyclopentasiloxane (Mirasil CM5)2
Phenyl Trimethicone (Dow Corning 556 Fluid)3 Meadowfoam Estolide (MEADOWESTOLIDE® Meadowfoam Delta-Lactone (MEADOWLACTONE® B Cyclopentasiloxane (and) PEG-10 Dimethicone (and) Disteardimonium Hectorite (BENTONE®
)4 )4 LUXE WS)4
C Deionized Water Propylene Glyco Sodium Chloride
Disodium EDTA (Edeta BD)5 D Glycerin (and) Water (and) Pyrus Malus Seed Extract
(Botanykem Apple Seeds Extract)6 Phenoxyethanol (and) Ethylhexylglycerin (Euxyl PE9010)7 Hydrolyzed Hyaluronic Acid (Hyacare 50 (1%
Solution in Water))8 Lycium Barbarum Fruit Extract (Goji in Glycerin) Bio-Botanica9
Procedure
Heat Phase A and Phase C separately to 70°C with mixing. Using a Silverson homogenizer add Phase B to Phase A and mix until dispersed. Add Phase C to Phase A/ and continue mixing for 10 minutes. Cool to below 30°C with propeller mixing and add Phase D Suppliers 1 Shin Etsu 2 Bluestar Silicones 3 Dow Corning 4 Elementis 5 BASF 6 Berkem 7 Schülke & Mayr 8 Evonik 9 Bio-Botanica
GATTEFOSSÉ Anti-UV Refreshing Bi-Gel SPF30 PHASE INGREDIENTS
INCI NAME
A1 Demineralized Water Water
Sunspheres™ Styrene/acrylates Copolymer
Powder1 Cocoate™ BG2
A2 Satiaxane™ CX913 Glycerin
A3 Novethix™ l-104
Butylene Glycol Cocoate Xanthan Gum Glycerin
Butylene Glycol Butylene Glycol
Water, Acrylates/Beheneth-25 Methacrylate Copolymer
A4 Sodium Hydroxide Water, Sodium Hydroxide (10 % sol.)
A5 E.D.T.A. Sisodium Disodium EDTA Salt
B Emulfree®
Parsol® Parsol® Parsol® Parsol®
CBG2
Solastay® Hallbrite® Tinogard®
17895 EHS5 MCX5 HMS5 S16
BHB6 TL7
Isostearyl Alcohol, Butylene Glycol Cocoate, Ethylcellulose
Butyl Methoxydibenzoylmethane Ethylhexyl Salicylate
Ethylhexyl Methoxycinnamate Homosalate
Ethylhexyl Methoxycrylene Butyl Octyl Salycilate
Benzotriazolyl Dodecyl P-Cresol PERSONAL CARE EUROPE
64.00 3.80 1.00 0.20 1.00
1.00 0.50
0.50
C Preservative D Valvance™ Touch 2105
Preservative Silica
E Parfum Dome Parfum Relax rs597168
F Sodium Hydroxide Water, Sodium Hydroxide (10 % sol.)
Procedure
% W/W 10.00 5.00 4.00 2.00 2.00 5.00
Disperse the Sunspheres™ Powder into water+Cocoate™ BG and heat up to 55°C then homogenized with an Ultra Turrax (13000 rpm) for 15 minutes (Cocoate™ BG is addind to reduce the formation of foam). Then add A2 into A1 under mixing. Mix for 10 minutes to let the gel swell. Then add A3 and A4 to neutralize the Carbopol®
. Then add A5 and heat up to 55°C. Heat B up to
78 °C until complete solubilization. Introduce slowly B (75 °C) into A (55°C) under mixing 1500 rpm and maintain mixing for 30 minutes. During the cooling step maintain the mixing at 1200 rpm. At 35 °C add phase C , D and E and mix at 1200 rpm for 5 minutes. Then add F to adjust pH at 6.3 and mix for 5 minutes at 1200 rpm. Cool to 25 °C under mixing.
Properties
Aspect: Glossy and slightly yellow fluid emulsion pH = 6.3 ± 0.3 Viscosity Brookfield RV (spindle A, speed 5): approx. 5 000 mPa.s after 24h Suppliers 1 Dow 2 Gattefossé 3 Cargill 6 Hallstar 7 BASF 8 Technico-Flor
4 Lubrizol
HALLSTAR Be Gone Blue SPF 30 PHASE INGREDIENTS A HallBrite®
EZ-FLO TDX1 5 DSM Nutritional Products
0.70 1.00
0.30 0.10
INCI NAME Butyloctyl Salicylate, Titanium Dioxide
JZ12-134 % W/W 20.00
(nano) [Titanium Dioxide] (40%), Triceteareth-4 Phosphate, Dimethicone Crosspolymer, Silica
BLUE Oléactif®1 Glycine Soja Oil (and) Polyglyceryl-3 Olivem® 20201
1639-1.23 % W/W 52.45
2.00
1.50 0.30 3.00 3.00 1.00
0.05 0.10 5.00
3.00 5.00 7.50 7.00 2.00 4.00 1.00
Procedure
Add phase A to the main vessel and mix until uniform. Add liquids from phase B to a secondary vessel and start mixing, then add the Xanthan gum and mix until uniform. When phase A is homogeneous, slowly add phase A to phase B with prop mixing until a smooth gel is formed. Properties
Appearance: Smooth white gel Viscosity (Brk, DVII, T-D, 20 rpm, after 24 hours at room temperature; mPa•s): 13,000–21,000 pH (as is): 6.0–7.0 Suppliers 1 Hallstar
INGREDION Moisturising Face Serum PHASE INGREDIENTS A Purified Water
B
Diisostearate (and) Oryza Sativa Extract (and) Oryza Sativa Germ Extract Ethylhexyl Olivate, Sodium Acrylates Copolymer, Polyglyceryl-4 Olivate Water (Aqua) Glycerin
Caprylyl Glycol, Phenoxyethanol,
Hexylene Glycol Xanthan Gum (pharma grade)
Trisodium Ethylenediamine Disuccinate (37% active)
1.00 2.00
to 100 3.00 a.n
0.20 0.30
INCI NAME Aqua/ Water
IGPC 4.10A % W/W 74.50
September 2018
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112