search.noResults

search.searching

saml.title
dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
106 FORMULATIONS


Lavender Essential Oil Blue Mica


Mackanate® LO 100 Disodium Lauryl Sulfosuccinate Lauramidopropyl Betaine Demineralized Water Citric Acid, 50%


Panthenol


Mackpro® Plus Rice C Cocodimonium Hydroxypropyl Hydrolyzed Rice Protein


Jaguar® Excel


Rhodasurf® PEG 6000 NAT


Guar Hydroxypropyltrimonium Chloride Polyethylene Glycol


Procedure: Step 1: Add components of Phase A (Coconut Oil, Dermalcare® LIA MB, Mackine® 301, Cetyl Alcohol, Rhodasurf® PEG 6000 NAT) to a 250 mL jar and put


the jar in water bath to melt at ˜80°C. Step 2: Combine components of Phase B (Dry powder) (Jaguar® Excel, Blue Mica, Mackanate® LO 100 and Lauramidopropyl Betaine) in a 250 mL jar and mix well. Step 3: Combine components of Phase C (Lavender Essential Oil, DI Water, Citric Acid at 50%, Panthenol and MackProPlus® Rice C) and mix well with a stir bar. This should form an emulsion. Step 4: When Phase A is fully melted, add Phase B and C to Phase A and mix with a Jiffy mixer carefully in the jar. Step 5: When thoroughly mixed, press into moulds. If using Si rubber moulds, reinforce the sides of the mould so the bars are not bulging out at the sides. Step 6: Put bars in the moulds into the fridge to cool. Once cool, carefully remove from the moulds.


SOPHIM


MRS. KISS NATURAL TINTED LIP OIL PHASE INGREDIENTS


INCI NAME A Castor Oil OR VIR


Olive Oil OR EXTRA VIR


Phytosqualan


Ricinus Communis Seed Oil Olea Europaea Fruit oil Squalane


Phytowax® 18L57 OR Hydrogenated Olive Oil Stearyl Esters Plum Oil OR VIR


Prunus Domestica Seed Oil Pigment B Skinfeel 70 TOCO NON-GMO Suppliers: 1. Sophim


Polyglyceryl-2 Triisostearate, RED 28 LAKE (CI 45410)


Helianthus Annuus Seed oil, Tocopherol 1


Procedure: Weigh out phase A and heat to 70/80°C to melt wax completely.Stir at 800rpm. Weigh phase B and stir in to phase A.Hot condition.


SPLR % W/W 50


1 1 1


1 1


15


12.4 12 10


0.1 0.5


VARIATI ULTRA CREAMY FOUNDATION


PHASE INGREDIENTS A Caprylic/Capric


TRI-K MOISTURIZING EUCALYPTUS FOAMING FACIAL WASH


PHASE INGREDIENTS A Water


BioPure™ GLDA


C Galaxy CAPB SB Galsoft SCGL Galsoft SCT-40


D Citric Acid E HyaClear 7®


Biochemica® Eucalyptys Oil


INCI NAME Water


Tetrasodium Glutamate Diacetate


B Glycerin 99.5% USP Glycerin Keltrol® CG-SFT


Xanthan Gum


Cocamidopropyl Betaine Disodium Cocoyl Glutamate Sodium Methyl Cocoyl Taurate Citric Acid


Water, Sodium Hyaluronate Eucalyptys Oil


Unicert Blue 05601-J CI42090/ Blue 1 (0.1% Solution) TRIstat PCG 90/10


PERSONAL CARE October 2024


Phenoxyethanol, 1,2-Octanediol/ Caprylyl Glycol


Triglyceride Ozokerite


SG 5-75


SPLR % W/W 69.90


1 0.10 2 3.00 3 0.40 4 10.00 4 8.00 4 6.00 5 0.35 6 1.00


7 0.15 8 0.10 6 1.00


B Tridecyl Trimellitate Titanium dioxide Red iron oxide Yellow iron oxide Black iron oxide


Vari® CC-O Mica INCI NAME


Caprylic/Capric Triglyceride Ozokerite


Tridecyl Trimellitate


Titanium dioxide (CI 77891) Red iron oxide (CI 77491) Yellow iron oxide (CI 77492) Black iron oxide (CI 77499)


Calcium carbonate (and) magnesium carbonate (and) hydrogenated ethylhexyl olivate (and) hydrogenated olive oil unsaponifiables


Synthetic mica


C Sodium hyaluronate* Sodium hyaluronate D Caolino


Kaolin 2 3


MU 1102-23 SPLR % W/W


30.5 4.5


10 10.6


3 0.35 3


0.75 3 0.15 1 38.55


1.5 0.1 3


Procedure: Weigh phase B. Dissolve phase A at 90°C. Wet phase B with a portion of phase A and pass it twice through laminator. Insert phase B into the remaining phase A and verify complete homogenization. Add phase C and then phase D. Processing and casting temperature 95°C. * particle size: D90 < 20 μm


Suppliers: 1. Variati 2. Magnesia 3. AromataGroup


0.9 1.0


61.7 6.0 4.2 3.6


0.5 0.5 1.0 6.0


Procedure: Combine phase A at room temperature until uniform. Premix Phase B, add to batch and heat Phase A/B to 75°C. Add phase C one at a time until fully dissolved and uniform at 75°C. Cool the batch to 40°C. Adjust the pH of the batch with Phase D as needed to 5.5-6.0. Add phase E ingredients one at a time. Cool to room temperature. Readjust pH if needed. Properties: pH 5.88, Viscosity: RVT #3 @ 20 rpm; 610 cps Suppliers: 1. Jarchem Industries, Inc. 2. Protameen Chemicals Inc. 3. CP Kelco 4. Galaxy Surfactants Ltd.


5. Astro Chemicals 6. TRI-Kindustries, Inc. 7. Hallstar 8. Sensient Cosmetic Technologies


VANDERBILT RICH & ELEGANT MINERAL SUNSCREEN CREAM


PHASE INGREDIENTS A Water


VANATURAL® CA VANZAN® NF Glycerin


Disodium EDT


Citric Acid Solution (50% w/w)


B SP NatraGem® E145 NP MBAL-LQ-(MV)


Neobee® M-5 Cosmetic


C Solaveil® CZ-300 MBAL-LQ-(WD)


Solaveil® CT-300 MBAL-LQ-(WD)


D Preservative


INCI NAME Water


Bentonite


Xanthan Gum Glycerin


Disodium EDTA Citric Acid (and) Water Polyglyceryl-4 Laurate/Succinate


SpanTM 20-LQ-(AP) Water RitamollientTM 3E


Sorbitan Laurate


Trimethylolpropane Tricaprylate/Tricaprate


Zinc Oxide (and) Caprylic/Capric Triglyceride (and) Polyhydroxystearic Acid (and) Isostearic Acid


Caprylic/Capric Triglyceride (and) Titanium Dioxide (and) Polyhydroxystearic Acid (and) Aluminum Stearate (and) Alumina


1


NO. 667


SPLR % W/W 53.90 1.00


1 0.50 3.00 0.10


2.00


2 2.46 2 3.04


3 4.00 4 2.00


Zemea® Propanediol Caprylic/Capric Triglyceride Propanediol 5 3.00 2 22.50


2 2.50 q.s.


Procedure: Slowly add the VANATURAL® CA and VANZAN® NF sequentially or as a dry blend to the water while stirring with a propeller mixer. Mix until fully hydrated. Add the rest of Phase A ingredients and mix well after each. Combine the Phase B ingredients and mix until homogeneous on propeller mixer. Add the Phase C ingredients to Phase B with mixing and mix until homogeneous after each. Slowly add Phases B+C to Phase A with stirring on a propeller mixer and mix thoroughly. Then, homogenize the batch for ten minutes. Cool if necessary to < 30°C, with mixing on a propeller mixer. Add Phase D (preservative) with mixing and mix until homogeneous. Check and adjust (if necessary) to pH 6.5 – 7.5.


Suppliers: 1. Vanderbilt Minerals, LLC 2. Croda, Inc. 3. Rita Corporation 4. Stepan Company 5. Premient Covation


www.personalcaremagazine.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108