76
FORMULATIONS
While every effort has been made to reproduce the formulations correctly, The Publisher cannot accept any liability for the information printed. All formulations are presented in good faith, but no warranty as to accuracy of results or suitability for a particular use is given, nor is freedom from patent infringement to be inferred. The formulations are offered solely for consideration by the participating companies.
ANGUS CHEMICAL COMPANY FIXING CREAM
PHASE INGREDIENTS A Water
Acudyne* 1000 1,3 Propanediol
INCI NAME Aqua (Water)
Acrylates/Hydroxyesters Acrylates Copolymer
Propylene glycol
Luviskol* K 90 Powder PVP Aculyn* 38
Acrylates/Vinyl Neodecanoate Crosspolymer
B AMP-Ultra PC 2000 Aminomethyl Propanol C Montanov* 68 MB Cutina* FS 45
Lanette* 16 Lanette* 18
Vegeline* 65 D Microcare* Emollient APDG
Cetearyl Alcohol (and) Cetearyl Glucoside
Stearic Acid (and) Palmitic Acid Cetyl alcohol Stearyl Alcohol
Ricinus Communis Seed Oil (and) Hydrogenated Castor Oil (and) Copernicia Cerifera (Carnauba) Wax
Decylene glycol (and) Caprylyl Glycol (and) Phenylpropanol
1
P.ST.P.2022.3 SPLR % W/W
q.s.
15.00 3.00
2 5.00 1
3
4 2.50 2 2.50
2 1.50 2 1.00 5 3.00 6 1.00
Procedure: Heat ingredients of Phase A at 80°C and mix it with a paddle stirrer at 300 rpm. Once homogenous, neutralize with AMP-ULTRA PC 2000. Heat ingredients of Phase C at 80°C. Emulsify C into AB while mixing at 800 rpm for 5 minutes. Allow the mixture to cool down and mix at 300 rpm. At 30°C, add Phase D at 300 rpm. Properties: Appearance: Shiny white cream pH: 6.7-6.9 Stability: 1 month at room temperature and 45°C Viscosity: 70,000 cP (Brookfield RVDV-IIT, spindle 6, 6 rpm, 1 min, 20°C)
Suppliers: 1. Dow 2. BASF 3. ANGUS 4. Seppic 5. SOPHIM 6. Thor
4.00 1.00
CLR PURE BALANCE DAY CARE OW
PHASE INGREDIENTS
A Deionized Water B Eumulgin SG Lanette O MB Cutina GMS-V Cutina HVG Cetiol CC
Myritol 318 MB Rheocare XGN
CutiBiome CLR™ C ProRenew Complex CLR™ MultiMoist CLR™ Microcare SB
INCI NAME Water
Sodium Stearoyl Glutamate Cetearyl Alcohol Glyceryl Stearate
Hydrogenated Vegetable Glycerides Dicaprylyl Carbonate
Caprylic/Capric Triglyceride Xanthan Gum
Octyldodecanol, Leptospermum Scoparium Branch/Leaf Oil, Piper Nigrum Seed Extract, Magnolia Officinalis Bark Extract
Lactococcus Ferment Lysate
Fructooligosaccharides, Beta Vulgaris (Beet) Root Extract, Water
Water, Sodium Benzoate, Potassium Sorbate
Aromatic Pomegranate Extract Punica Granatum Fruit Extract
D Lactic Acid (80%) Lactic Acid, Water
I-1.135.01A SPLR % W/W
1 72.05
2 0.50 2
1.50
2 2.00 2
1.50
2 6.00 2 6.00 2 0.30
3 3.00 3 3.00 3 3.00 4 0.80
5 0.20 1 0.15
Procedure: Mix A and B separately and heat up to 80°C. Add A to B and homogenize for 2 minutes. Cool down under stirring. Add C, in this order, and homogenize again for a short moment. Adjust pH value to 5.5 with D.
Suppliers: 1. N.A. 2. BASF 3. CLR 4. THOR 5. Carrubba
GATTEFOSSÉ SOLID OIL
PHASE INGREDIENTS
BRB MINERAL UV FILTER
PHASE INGREDIENTS
A1 Cithrol™ PG32IS A2 BRB 423 A3 BRB 6341
A4 BRB Caprylyl Methicone A5 Solaveil XT-100
A6 BRB 2835 A7 BRB DM 55 B1 DI water
B2 Butylene Glycol B3 Sodium Chloride C1 Euxyl PE 9010
INCI NAME Polyglyceryl-3 Diisostearate
Cetyl PEG/PPG-10/1 Dimethicone PEG-10 Dimethicone
Caprylyl Methicone
Titanium Dioxide (and) C12-15 Alkyl Benzoate (and) Polyhydroxystearic Acid (and) Stearic Acid (and) Alumina
Cetyl Dimethicone Dimethicone Aqua
Butylene Glycol Sodium Chloride
INCI NAME
S1210224-02 SPLR % W/W
1 2.50
2 2.50 2 1.00
2 5.00 1 30.00
2 0.50 2 3.00 50.80
3 3.00 3
1.00 Phenoxyethanol (and) Ethylhexylglycerin 4 0.70
Procedure: Add A1-A7 into a beaker and mix well. In a separate beaker, prepare B1-B3. Mix well. Add step 2 into step 1 slowly. Homogenize well. Add C1 into bulk. Mix well. Properties: Appearance: White cream Viscosity at 25°C (spindle 5, speed 10); cPs: approx. 30000 pH: N/A Sensory attributes; Soft & sliky feel
Suppliers: 1. Croda 2. BRB 3. Local supplier 4. Schülke Mayr
A Demineralized Water Water Eumulgin® SG Glycerin
B Cetiol® OE
Emulium® Mellifera MB
Geleol™ Pellets Cetyl Alcohol Kahlwax 6240 Cetyl Palmitate Preservative
C Gatuline® Expression D Perfume Petillante E Unicert Red 07004
AF 0603557 J ( 1.0% SOL.)
Sodium Stearoyl Glutamate Glycerin
Dicaprylyl Ether
Polyglyceryl-6 Distearate, Jojoba Esters, Polyglyceryl-3 Beeswax, Cetyl Alcohol
Glyceryl Stearate Cetyl Alcohol
Hydrogenated Vegetable Oil Cetyl Palmitate Preservative
Propanediol, Water, Acmella Oleracea Extract
Parfum Water, Red 4
1878-1.27
SPLR % W/W 10.65
1 0.30 31.50 32.20
1
2 6.00 2 3.00
3
1.00 7.50 2.50 0.50
2 1.00 4 0.30 5 0.55
Procedure: Prepare phase A mix very slowly and heat to 75°C until gelling occurs. Prepare phase B and heat to 75°C. Add B to A without mixing then mix slowly under vacuum (defloculent or Rotor/Stator 850 rpm, mixing speed should be adapted to equipment in order to lower the creation of foam). Cool under slow mixing and at about 40°C, add phase C, D and E. Complete cooling at about 30°C. Properties: Aspect: Transluscent pink thick gel pH = 7.1 +/- 0.5 Viscosity Brookfield (spindle E, speed 5) : approx. 900 000 mPa.s after 24H
Suppliers: 1. BASF 2. Gattefossé 3. Kahl 4. Expressions Parfumées 5. Sensient
PERSONAL CARE June 2023
www.personalcaremagazine.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80
