82 FORMULATIONS W
Water (and) Camellia Sinensis (Green Tea) Leaf
Extract (Green Tee Extract)13 Sodium Hyaluronate (HyaCare) 1% Solution in Water9
Procedure
Combine Phase A and heat to 75°C with mixing. Combine Phase B and heat to 75°C with mixing. Transfer Phase B to a Silverson homogenizer and add Phase A to Phase B. Continue to mix for 10 minutes. Transfer to a propeller mixing and cool. At 30°C add Phase C and mix until
uniform.packaging. Properties (25°C) Appearance: Thin White Lotion Viscosity: DV-II. Spindle 6. 10rpm 5350cP Suppliers
1 Galcon Chemie 2 BASF 3 Shin-Etsu 4 Stearinerie Dubois 5 Elementis Specialties 6 Momentive 7 Merck 8 Dow Corning 9 Evonik 10 Inolex 11 Azelis 12 Active Concepts 13 Dragonspice 14 Spinnrad
FLORATECH Replenishing All-Day-Hold Foundation Primer PHASE INGREDIENTS
INCI
A Deionized Water Water Carbopol® Ultrez Carbomer 10 Polymer1
B Plantaren®
2000 N UP2 AMP-Ultra®
Neutralizing Amine
C Deionized Water Water 250
Natrosol® HHR CS4x
D Granpowder® USQ5 Hydroxyethylcellulose Polymethylsilsesquioxane (and)
HDI/Trimethylol Hexyllactone Crosspolymer
Preservative1 E Glycerine 99.7% Glycerin
USP Kosher6 1,3-BG7
Butylene Glycol
Floraesters K-20W Hydrolyzed Jojoba Esters (and) Jojoba8
Water (Aqua) Deionized Water Water F Gransil® SiW-050/IS5 Isododecane (and) Water (and)
Dimethicone (and) Polysilicone-11 (and) Butylene Glycol (and) Dimethylacrylamide Acrylic Acid/Polystyrene Ethyl Methacrylate Copolymer (and) Cococaprylate/Caprate (and) Decyl Glucoside
Gransil® SiW-0265 Cab-O-Sil® M-59
Cyclopentasiloxane (and) Dimethicone 23.00 (and) Water (and) Polysilicone-11 (and) Butylene Glycol (and) Decyl Glucoside Silica
Citric Acid, USP Citric Acid (and) Water (30% Solution)10
Procedure
Mix the Carbopol Ultrez 10 Polymer with the deionized water of Phase A in a vessel with rapid propeller agitation at room temperature. Continue mixing until the Carbopol Ultrez 10 Polymer is fully hydrated. Add Phase B to Phase A in the order listed at room temperature. In a separate vessel, combine the Natrosol 250 HHR CS and the deionized water of Phase C using moderate propeller agitation. Heat to 40°C and keep mixing until a clear gel has formed. Let Phase C cool to room temperature. Once Phase C has cooled and the gel
PERSONAL CARE EUROPE
1.50 q.s.
5.00 5.00
q.s. 1.00
7.00 1.00
10.00 0.20
6.00 Decyl Glucoside PC 2000, Aminomethyl Propanol
0.20 q.s.
has formed, combine with Phase AB using moderate propeller agitation. Next, add Phase D to Phase ABC in the order listed at room temperature. In a separate vessel, combine the rst three ingredients of Phase E at room temperature and mix with moderate propeller agitation until uniform. Add the water of Phase E and continue mixing. Once Phase E is uniform, combine with Phase ABCD at room temperature using moderate propeller agitation. Add Phase F to Phase ABCDE in the order listed at room temperature using moderate propeller agitation. Suppliers 1 The Lubrizol Corporation 2 BASF Corporation 3 Angus Chemical Company 4 Ashland, Inc. 5 Grant Industries 6 Acme-Hardesty Co.
7 Nexeo Solutions 10 Archer Daniels Midland Co.
GATTEFOSSÉ Solid Oil
PHASE INGREDIENTS
M033 %
q.s. 0.20 0.20 q.s. INCI NAME
Demineralized Water Water
Eumulgin® Glycerin Cetiol®
Emulium® Pellets
SG Sodium Stearoyl Glutamate Glycerin
OE Dicaprylyl Ether
Mellifera MB Polyglyceryl-3 Beeswax, Cetyl Alcohol Geleol™
Cetyl Alcohol Kahlwax 6240 Cetyl Palmitate Preservative Gatuline®
Glyceryl Stearate Cetyl Alcohol
Hydrogenated Vegetable Oil Cetyl Palmitate Preservative
Propanediol, Water, Acmella
Expression AF Oleracea Extract Perfume Petillante Parfum
0603557 UnicerT Red Water, Red 4 07004 J ( 1.0% SOL.)
Procedure
Add Carbopol SF-1 to the water. Add TRIquil S and TRIquil L Neutralize to pH 6.8 using 10% NaOH. Mix until uniform. Begin heating batch to 65˚C. Add remaining phase B ingredients, mix uniformly between each addition. Cool Batch to 35˚C, add phase C ingredients individually, and mix uniformly after each addition. Suppliers
1
J.Rettenmaier & Sohne 2 Omya 3 Gattefossé 4 BASF 5 Sasol 6 Hänseler 7 SLI Chemicals 8 Sigma Aldrich 9 Huntsman 10 Omya
HALLSTAR City Lights Care PHASE INGREDIENTS A
8 Floratech
9 Cabot Corporation
1878-1.27 % W/W 10.65
0.30
31.50 35.20
Polyglyceryl-6 Distearate, Jojoba Esters, 6.00
3.00 1.00 7.50 2.50 0.50 1.00
0.30 0.55
INCI
Water (Aqua) (deionized) Butylene Glycol Glycerin Betaine Allantoin
Trisodium Ethylenediamine Disuccinate Phenoxyethanol, Methylparaben,
Eurol® BT1 Olivem® 20201 B
CS18-028-01A %
to100 3.00 2.00 1.00 0.20 0.30 a.n.
Ethylparaben, Butylparaben, Propylparaben Olea Europaea (Olive) Leaf Extract, Water 0.25 Ethylhexyl Olivate, Sodium Acrylates Copolymer, Polyglyceryl-4 Olivate Water (Aqua) (deionized)
25.00 June 2018 1.50
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88
