Page 122
www.us-tech.com
February, 2019
Ironwood Intros Clamshell BGA Test Socket
Solutions for Electronic Assemblies and Systems
Eagan, MN — Ironwood Electronics recently introduced a new stamped spring pin socket addressing high-per- formance requirements of BGA1089, the CBT-BGA-6082. The contactor is a stamped spring pin with 0.7 oz (19g) actuation force per ball and a cycle life of 125,000 insertions. The self inductance of the contac-
Visit us at booth 947
tor is 0.93 nH, insertion loss is less than 1 dB at 21.9 GHz and it has a capacitance of 0.097 pF. The current capacity of each contactor is 4A at 72°F (40°C) temperature rise. The socket’s operational temperature range is –67 to +356°F (–55 to +180°C). The socket has a clamshell lid
for ease of chip replacement in the production environment. It also has an integrated compression plate for vertical force actuation, without dis- torting device position. The specific configuration of the package to be tested in the CBT-BGA-6082 is a 1.4 x 1.4 in. (35 x 35 mm), 0.04 in. (1 mm) pitch, 33 x 33 ball array. The socket is mounted using
supplied hardware and uses a small footprint. The small footprint allows inductors, resistors and capacitors to be placed very close to the device for impedance tuning. The BGA is placed into the device and the lid is
closed by snapping to the latch. Vertical force is applied by turning its compression screw.
CBT-BGA-6082 clamshell production test socket.
The socket is made of aluminum
components for power dissipation and it can be customized for higher power dissipation by adding an axial flow fan and a finned heat sink. The socket can be used for quick device screening, device characterization at extreme temperatures and final pro-
duction test. Contact: Ironwood Electronics,
1335 Eagandale Court, Eagan, MN 55121 % 952-229-8200 E-mail:
info@ironwoodelectronics.com Web:
www.ironwoodelectronics.com
OTTO Intros Behind-Panel Pushbutton Switches
Carpentersville, IL — OTTO has introduced its new LP3S and LP3S- V, which are shorter, behind-panel versions of the company’s LP3 and LP3-V illuminated, momentary ac - tion switches. The new switches are designed
Experience the new home of the EMS industry. Visit the EMS Park at the SMTconnect!
At the special showcase area you can find Indivual EMS solutions and make valuable connections in a familiar atmosphere.
Nuremberg, 7 – 9 May 2019 Be part of the community:
smtconnect.com
to provide attractive, lighted position indication for demanding applica- tions, where reliability is critical. The LP3S offers tall and dome-style but- ton choices, optional printed legends, a watertight seal option to IP68S and IP69K, six standard LED color choic- es and a logic level option. The LP3S is designed for use in grips and other applications with limited space in off- highway, material handling, industri- al controls, marine and other harsh commercial applications.
The vandal-resistant LP3S-V
offers flat and domed actuator bezel shapes, a variety of button types, a watertight seal option to IP68S and IP69K, six standard LED color choic- es, a logic level option, and has both aluminum and stainless steel cases. The switch offers positive tactile feedback and both flat and domed actuator bezel shapes. The LP3S-V is suitable for marine, off-highway, industrial control and panel applica- tions that require a secure, rugged,
sealed, illuminated switch. Contact: OTTO Engineering,
Inc., 2 E. Main Street,
Carpentersville, IL 60110 % 847-654-8203 E-mail:
jim.starkey@
ottoexcellence.com Web:
www.otto-controls.com
RFMW Now Supports Qorvo GaN Amplifier
San Jose, CA — RFMW is now selling and supporting Qorvo’s QPA2213 high-performance, wideband, driver amplifier. The GaN on SiC amplifier provides greater than 2W Psat across a bandwidth of 2 to 20 GHz. Designed to support applications in EW, radar, commercial and military communica- tions systems, and test equipment, the QPA2213 has a small signal gain of 22 to 25 dB with a large signal gain of 16 dB. Matched to 50W, it offers flexible DC bias conditions to optimize power output versus power added effi- ciency (PAE). The device is offered in a small, 0.2 x 0.2 in. (4.5 x 4.5 mm) air-cavity package. RFMW is a specialty electronics
distributor focused exclusively on customers that require RF and microwave components and semicon- ductors, as well as component engi-
See at IPC APEX, Booth 4020, and at SMTconnect, Booth 947
neering support. The company continues to ex -
High-performance, wideband, driver amplifier.
pand its list of products from suppli-
ers with RF/microwave expertise. Contact: RFMW, Ltd., 188
Martinvale Lane, San Jose, CA 95119 % 408-414-1450 E-mail:
info@rfmw.com Web:
www.rfmw.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136
