Page 46
www.us-tech.com
March, 2014 Universal Electric Oven From Grieve
Round Lake, IL — An electrically- heated, 500°F (260°C) universal style oven from Grieve, No. 977 is current-
ly used to preheat racks of small cir- cuit boards at the customer’s facility. Workspace dimensions measure 30 x
40 x 31-in. 9kW are installed in Nichrome wire heating elements to heat the unit, while a 600 CFM, 1/2 HP recirculating blower motor provides front-to-rear universal airflow to the workload. The oven has 4-in. thick in-
Find Electronic Failures with Vibration Testing
Benchtop Vibration Table
sulated walls throughout, Type 304, 2B finish stainless steel inte- rior and aluminized steel exterior. The unit is equipped with four drawers, each 24 x 30 x 2-in.H and rated for 50 lbs. loading. The drawers open to extend a full 20- in. from the front of the oven for easy parts handling. An integral leg stand is also provided on this unit.
Controls on No. 977 include a
digital indicating temperature con- troller, manual reset excess temper- ature controller with separate con- tactors and recirculating blower air- flow safety switch.
Electric oven to preheat PCBs. Contact: The Grieve Corp., 500
Hart Road, Round Lake, IL 60073- 2835 % 847-546-8225 fax: 847-546- 9210 E-mail:
sales@grievecorp.com Web:
www.grievecorp.com
High Performance Fans from YS Tech
Garden Grove, CA — YS Tech has de- veloped three new high performance fan series which are well suited for use in 1U rack applications.
cial placement opportunities within the 1U rack cooling fan application. Models lending themselves to 1U rackmount designs are designat-
Visit us at Apex, Booth #1335!
Cincinnati Sub-Zero Cincinnati, OH
www.cszindustrial.com See at APEX, Booth 1335 (p) 513-772-8810 Cooling fans designed for 1U racks. The star of the 1U fan selection
is the 36mm series cooling fan, im- mediately bolstered by the 38 and 40mm series. Each series offers spe-
Perfect Soldering, Every Time! With Reduced Labor Costs!
Fancort and Japan UNIX together deliver a wide variety of contact, ultrasonic, or laser robotic soldering solutions to handle the most diffi cult soldering applications with ease and effi ciency. There is no need to struggle any longer. These systems will replace your highly skilled soldering operators with lower cost labor and consistent results-the challenge in today’s competitive marketplace.
Easy to program and set up Low consumable and maintenance costs Highest wattage heaters available Longest tip life in the market Positional accuracy to 10 micron Four desktop platforms with working area to 500mm x 500mm SCARA systems for in-line automation Fixtures designed and built by Fancort for turnkey system
ed XYW036028, XYW038028, and XYW04028. Design engineers will want to
examine the 36mm model to deter- mine if this size will offer the per- formance required. The 1U spec of 1.75-in. (44.45mm) tall will leave enough height to design a FRU (Field Replaceable Unit) if that is the goal. Each 36mm fan will produce 24.16 CFM of air volume and 67.52mm-
H2O pressure. If a 1U Rack FRU solution is
not needed, then either the 38mm or the 40mm high-performance models offer impressive performance. The 38mm, having 21.99 CFM and over
86mm-H2O pressure will make short work of those overstuffed 1U racks that are so common today. The critical stat on this fan is
the pressure figure. The more con- gested the interior of the chassis, the more force or pressure the fan must have to reach the required circula- tion. With the size of the 38mm se- ries, Designers will be able to place the fans just about anywhere within the chassis. Cooling fan placement external
to the chassis can be accomplished with the 40mm series. This model reli- ably produces over 32 CFM of flow and
an amazing 95mm-H2O pressure. Contact: YS Tech USA, 12691
31 Fairfi eld Place, West Caldwell, NJ 07007, ph: 973-575-0610 e-mail:
sales@fancort.com
www.fancort.com See at APEX, Booth 1243
Monarch St., Garden Grove, CA 92841 % 714-379-2460 Web:
www.ystechusa.com
NEW NE
NEW
EW
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116