This page contains a Flash digital edition of a book.
Page 36


www.us-tech.com


March, 2014


Manncorp: Budget Turnkey SMT System Package


The World’s Most Cost-Effective Automated Programming System Under $99,000


• Model 902 Pick & Place handler with 360° rotation


• 4 Site Universal Programmer with 1 set of adaptors


• Support for approximately 78,000 devices


• 2 JEDEC Tray Feeders • Tape & Reel Input De-taper of choice


• Exatron-built tape & reel output with Pin 1 vision


• Windows 7 Operator Interface with Internet support


www.exatron.com


1-800-EXA-TRON 1-408-629-7600


See at APEX, Booth 104


Willow Grove, PA — Manncorp has re- cently reconfigured and expanded its exclusive selection of SMT turnkey packages, including stencil printing, pick-and-place, and reflow soldering equipment, to accommodate a wider range of production levels and budgets. Among the ten different turnkeys pre- sented on its website is the new 2500-MV package. Priced at only $46,995, the 2500-MV is designed for companies with a limited budget and minimal floor space who need short-run, in-house production capability for ultra-precise, high compo- nent-mix SMT assembly. The cornerstone of the


2500-MV is the MC-400 pick- and-place system, utilizing Cognex® on-the-fly and bottom vision alignment, for high-ac- curacy, 2500 CPH placement of a wide range of advanced SMDs — from 0201 chip com- ponents to BGAs and 15-mil ultra-fine-pitch devices. The MC-400 has the capacity to accept up to 64 au- tomatic “smart” tape feeders and can also accept a wide variety of stick, cut- strip, and IC tray holders. Built upon the same architecture as Manncorp’s popular MC Series of SMT pick-and- place machines, MC-400 feeders and software are compatible with all other MC series equipment. The 2500-MV includes the


heavy-duty MC-110 stencil printer —a robust, high-precision, manual printer with a repeatability of ±0.02mm (less than 1 mil). Its universal mounting bracket allows clamping or screw mounting of frames up to 740 x


740mm (29 x 29-in.) and tool-free, self- locking, X-Y-Z and theta axis adjust- ments provide quick and easy stencil- to-pad alignment. The MC-301 profilable batch re-


flow oven rounds out the 2500-MV and simulates the performance of an inline system in a compact benchtop design.


Hi-mix low-cost SMT system.


Through its innovative user interface and Android operating system, pre- heat, soak, reflow, and cooling stages are easily programmed to conform to component and paste manufacturers’ precise specifications. For process con- trol and traceability, solder profiles are easily saved and distributed using


built-in WiFi. Contact: Manncorp, 1610 Re-


public Rd., Huntingdon Valley, PA 19006 % 800-745-6266 or 215-830- 1200 fax: 215-830-1206 E-mail: sales@manncorp.com Web: www.manncorp.com


See at IPC/APEX Booth #2070. DIE CUTTING AND GASKET FABRICATION


Rubber Seals and Gaskets for Demanding Applications


Die Cut Thermal Foam Insulation


Die cut porous plastic and PTFE for venting in a wide variety of applications


With a state of the art facility and a global reach, Interstate’s unique collaborative customer focused approach and highly experienced team of experts gives personalized attention to your company’s unique problem and works with you to deliver the right solutions every time with exceptional quality.


SEE INTERSTATE


IN ACTION


ISO 9001:2008 and ISO 13485:2003


Die Cut Acoustical Foams for Sound Attenuation


Die Cut Electrical Insulation From Ul94 Flame Retardant Polypropylene


55 Gilmore Drive Sutton MA 01590 USA Tel: 800-984-1811


sales@interstatesp.com www.interstatesp.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116