search.noResults

search.searching

dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
80 FORMULATIONS


SucranovTM 2000UP1


AminosylTM B ActiqueTM SCG1 Hyal 1%1 euxyl® K 9402 BiopureTM GLDA1


C Lonzagard® NAHS 10X Concentrate3


D Citric acid 50% solution4


uniform. Add ActiqueTM


Decyl Glucoside Sodium Cocoyl Glutamate Sodium Hyaluronate (and) Aqua


Phenoxyethanol (and) Benzyl Alcohol (and) Ethylhexyglycerin (and) T ocopherol


Tetrasodium Glutamate Diacetate Benzalkonium chloride


Citric acid


Procedure: Add water to a main vessel and begin propeller mixing. Add AminosylTM


L30, SucranovTM 2000UP, and AminosylTM Hyal 1%, BiopureTM


acid to adjust pH to 5-6. Note: This is a cold processing procedure. Properties Appearance: Clear to slightly opaque liquid pH: 5.0 - 6.0


Suppliers: 1. Jarchem 2. Schülke 3. Lonza 4. Tate Lyle


J. RETTENMAIER & SÖHNE INCI NAME Aqua


GENTLE FACE PEELING PHASE INGREDIENTS


A Demineralized water


Glucono-Delta- Lactone


C Trisodium Citrate Dihydrate


Citric Acid Monohydrate


D Microcare® NB (THOR PC)


Gluconolactone


B 20% sodium hydroxyde solution Sodium Hydroxide & Aqua


Sodium Citrate Citric Acid Sodium Benzoate


Sodium Gluconate Sodium Gluconate MPG-V


Propylene Glycol


Glycerine 99.5 % AMI COLZA


E VIVAPUR ® CS 032 XV


VIVAPUR ® CS 150 S


Glycerin SCG and mix until GLDA and preservative, continue mixing. Add phase C, continue mixing until fully incorporated 5. Add Citric


5.0


5.0 2.0


1.0


0.4 10


1.2


KAHLWAX DON’T WASTE TIME AND SHINE


PHASE INGREDIENTS A Water


INCI NAME Aqua


Propylene Glycol Propylene Glycol Dermofeel PA-31


B Lecigel2


C Stearic Acid Lanette 223


5723 Araucaria Resin + Octyldodecanol4


Emolid CC5 Dermofeel BGC1


6237 Rapeseed Wax4


D Vitamin F Forte6 Aquarich7


Licorice V50 5978 Preservative


Behenyl Alcohol Glyceryl Rosinate, Octyldodecanol Coco-Caprylate/Caprate


Butylene Glycol Dicaprylate/Dicaprate Hydrogenated Rapeseed Oil Linoleic Acid, Linolenic Acid


Glycerin, Water, Avena Strigosa Seed Extract, Lecithin, Potassium Sorbate, Citric Acid


Parfum Sodium Phytate, Aqua, Alcohol


Sodium Acrylates Copolymer, Lecithin Stearic Acid


HC-LEN-008-07 % W/W


ad 100 3.50 0.20 1.70 1.00 1.50


3.00


4.00 2.00


2.00 1.00


1.00


0.10 q.s.


% W/W 66.2 8.0 8.0 1.5 0.5


0.5 0.2


3.0 2.0 Microcystalline Cellulose & Xanthan Gum 3.0 Microcrystalline Cellulose F Perfume (MANE) Parfum 7.0 0.1


% Natural with ormulationFWater* 72.7 % Natural rigin withOFormulation Water* 97.9


Procedure: Mix phase A at room temperature and then heat to 65 °C for 15 min. Then cool before adjusting the pH to 5 with the 20% sodium hydroxide solution (phase B). Add phase C with stirring until complete dissolution. Disperse the ingredients of phase D one by one and then make the gel by integrating phase E (hydration 1 minute at 600 - 800 rpm and strongly mix at 2 200 rpm for 15 minutes). Then add the scrub and the perfume.


Suppliers: 1. Univar 2. Local 3. Hallstar 4. Jeen 5. Stepan 6. Active Micro Technologies 7. Active Concepts


Procedure: Heat phase A and C up to 70–75 °C. Add B to A and stir until the product is thick and homogeneous. Add phase C to A/B under rapid mixing. Cool under stirring. Add phase D below 40 °C. Suppliers: 1. Evonik Dr. Straetmans 2. Lucas Meyer Cosmetics 3. BASF 4. KahlWax 5. Mani 6. CLR 7. Rahn 8. Vögele


KOSTER KEUNEN SPF 30* SUNSCREEN LOTION


PHASE INGREDIENTS INCI NAME


A Deionized Water Aqua Disodium EDTA


Optiphen2 Glycerin


Keltrol CG-SFT3 B Kostol PGP1


Enhans SB-631 Enhans PC-381 Kester Wax K-241


Behneyl Alcohol S-751


Kester Wax K-82P1 Escalol 5172 Escalol 5872 Escalol HMS2 Escalol 5972


Disodium EDTA


Phenoxyethanol, Caprylyl Glycol Glycerin


Xanthan Gum


Polyglyceryl-3 Stearate, Beheneth-5 Bis-PEG-12 Dimethicone Beeswax


Polyethylene, Polycylopentadiene, Stearoxy Dimethicone


Lauryl Laurate Behenyl Alcohol


C18-38 Alkyl Hydroxystearoyl Stearate Butyl Methoxydibenzylmethane Ethylhexyl Salicylate Homosalate Octocrylene


1/17-402/163/447-1 % W/W


59.35 0.05 1.0 2.0 0.6 3.0 2.5


1.0 1.0 1.0 0.5


3.0 5.0


10.0 10.0


Procedure: Mix Phase A ingredients one at a time until uniform, then heat to 80-85 °C. Combine Phase B ingredients and mix and heat to 80-85°C until uniform. Add Phase B to Phase A and homogenize at 4000-5000 rpm at 80- 85 °C. When emulsion is smooth, cool slowly at low speed to RT. Properties Stability: 1 month at 45 °C.


Suppliers: 1. Koster Keunen, Inc. 2. Brenntag specialties 3. CP Kelco.


MERCK “ILLUMINATION” SUN PROTECTION LIGHT CREAM


PHASE INGREDIENTS A Water,


PERSONAL CARE January 2021 INCI NAME demineralized Aqua


SPF 20, UVA % W/W


ad 100 www.personalcaremagazine.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84