September, 2016
www.us-
tech.com
Page 85
Henkel Introduces Silicon Sealant for Automotive Industry
Irvine, CA — A brand new silicone adhesive sealant technology from Henkel Adhesive Electronics has been designed to provide both high performance and process flexibility. The new material, Bergquist TLB 400 SLT, is a two-part silicone sealant designed for automotive module applications. With an adaptable thermal cure profile that enables full cure at temper- atures from 25 to 180°C (77 to 356°F), the sealant allows automotive specialists to accommodate vari- ous manufacturing protocols. Its cure profile is adjustable based on individ-
ual requirements. If energy savings is a priority, the material can be fully cured and bonded at room tem- perature. If speed and throughput are more impor- tant, the sealant can be cured in minutes at higher temperatures to enable optimal process flow and end-of-line testing. In addition to its cure adaptabili-
ty, the sealant offers high reliability and material compatibility. Even at room temperature and independently of ambient moisture, once the two parts are mixed, it will seal and bond, creating an environmentally protected enclosure. The adhesion strength of the material to various automotive surfaces including aluminum, steel and plasma-treated plastic is robust and its elongation to break is excellent at 400 percent. Compatibility with other addition
cure products, such as Henkel’s Gap Filler materials, enables automotive manufacturers to confidently incorpo- rate the new sealant into existing processes and product designs.
CAIG Labs Introduces Cleaner and Solder Flux
Poway, CA — CAIG Laboratories has introduced its Deoxit® Gold series along with its CAIG no-clean solder flux. The Deoxit Gold is a metal con-
Bergquist TLB 400 SLT sealant for automotive electronics.
Bergquist TLB 400 SLT has shown superb
performance results with a variety of automotive applications including engine control units, hybrid electric and electric vehicle modules, electronic enclosures and integrated brake control modules. The material exhibits high reliability in the appli- cation at high temperature and humidity, and is resistant to degradation from exposure to common
automotive fluids. Contact: Henkel Electronic Materials LLC,
14000 Jamboree Road, Irvine, CA 92606 % 714-368-8000 fax: 888-943-6535
E-mail:
doug.dixon@henkel.com Web:
www.henkel-adhesives.com
See at SMTAI, Booth 936
Vacuum Tweezer Solutions
For nearly thirty years we have been a leading supplier of vacuum handling solutions to the world’s high technology fi rms. Our patented ESD safe products are used by CLASS I clean room personnel, electronic assemblers, semiconductor manufacturers, the optics industry and universities around the world. Our success comes from developing innovative manual vacuum handling tools and pick-up tips based on customer requests and customer feedback. These tools provide customer specifi c solutions that make assembly and processing operations more productive and ergonomic. Parts range in size from 0.13mm (0.005”) up to 300mm (12.0”) for easy handling.
• Self-contained vacuum tweezers
• Portable, battery-operated continuous vacuum handling systems
• Bench top 110/220 volt vacuum tweezer systems
• Low cost options Deoxit Gold and no-clean solder flux.
tact and connector enhancer, cleaner and conditioner. It is designed to improve all metal electrical connec- tions and virtually eliminates any data intermittency. It improves con- ductivity, signal quality and reliabil- ity, prevents dendrites and fretting corrosion, and reduces wear and abrasion while providing long-lasting protection. CAIG no-clean flux does not
need to be refrigerated, has a stable shelf life, displays excellent wetting and can be left safely on circuit boards and parts even after reflow
without cleaning. Contact: CAIG Laboratories,
Inc., 12200 Thatcher Court, Poway, CA 92064 % 800-224-4123 E-mail:
info@caig.com Web:
www.caig.com
See at SMTAI, Booth 722 2130 Victor Place, Colorado Springs, Colorado 80915 USA Website:
virtual-ii.com E-mail:
sales@virtual-ii.com USA Telephone: 719-572-5566 Fax: 719-572-5504 See at SMTAI, Booth 135
These hand tools replace tweezers and other gripping means for many applications, making them ideally suited for ergonomic manipulation of parts during assembly, inspection, rework and service operations.
Virtual Industries offers a broad line of accessories including miniature rubber vacuum cups, PEEK wafer handling tips, and precision machined handling tips for critical handling operations.
Visit our website or contact us for additional information.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116