This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
46mm FILLER HOSE CAP This non-vented, non-locking cap will fit directly into the end of a 45mm ID hose. 40mm
high. 50mm maximum diameter. #FHCAP46 £60 (£72 inc vat) ONLINE
360° VIEW
ZINC ALLOY SURFACE MOUNT CAP With integral flange. 2½" internal throat diameter. Vented. Made in UK. Sprung release catch. Maximum overall dimensions 121mm x 111mm x 51mm high. Four 9mm fixing holes on a 95mm PCD. Gasket supplied. #FC121111 £60 (£72 inc vat)
ONLINE
360° VIEW
ASTON FINISHING CAP Here's a very nicely chromed, brass cap with a sprung release catch and sprung lid. We call it a finishing cap because there is no seal between the cap and the neck limiting its functionality as a stand-alone fuel filler cap. However it looks superb as a decorative cover for your existing fuel cap. The neck is designed to fit on to a 61mm diameter steel or aluminium tube and is secured with three grub screws. FITTING IDEA: Our #FLA212 almost fits. If you have access to a lathe you can remove the tops of the threads until it's a nice fit in the cap. It still won't be a functional cap but you'll have a smart mounting flange on a smart cap. Weight 424 gms. #AST61 £26 (£31.20 inc vat)
ZINC ALLOY SURFACE MOUNT CAP With integral flange. 2¼" internal throat diameter. Non vented. Made in UK. Sprung release catch. Maximum overall dimensions 103mm x 81mm x 43mm high. Four 9mm fixing holes on a 92mm PCD. Gasket supplied. #FC10381 £55 (£66 inc vat)
ONLINE
360° VIEW
ONLINE
360° VIEW
Page 78
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733