This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
FUEL INJECTION PUMP. With boots and connectors. 13.5 volt. (12 volt)
Normal running pressure 3 Bar. Maximum pressure 8.5 Bar. Flow 156 Ltrs / Hour. Inlet size 12mm push-on Outlet size 8mm push-on Both straight unions Diameter 52mm. Overall length 175mm. #INJP4 £55 (£66 inc vat)
ONLINE
360° VIEW
FUEL INJECTION PRESSURE REGULATOR This unit allows adjustment of fuel pressure at the injector to match fuel requirements of modified and tuned engines. Pressure range 1 to 5 Bar (14 to 72 psi). 8mm hosetails in and out. 5mm hosetail for vacuum connection. The unit has a 1/8" npt female thread with a blanking plug for temporary fitment of a pressure gauge. NOTE: We recommend installation of these units is checked and tested by a competent automotive workshop. Dynamometer setup may be required for full benefit. #FIPR8 £72 (£86.40 inc vat)
ONLINE
360° VIEW
IN-TANK FUEL INJECTION PUMP 120 ltrs / hour. 3 bar (45 psi) pressure. Minimum tank depth 230mm. 8mm outlet. Nylon gauze filter. Will fit through a 50mm hole. Mounting plate diameter 82mm. Five 5mm fixing holes on a 63mm PCD. Can be secured with M5 screws into M5 rivnuts fitted around the 50mm hole. 750mm double insulated two core fly lead with a 2 pin plug that can be easily removed and new terminals fitted. No gasket supplied. Can be sealed with a bead of polyuethane adhesive / sealant. #INJP3 £40 (£48 inc vat)
ONLINE
360° VIEW
FUEL INJECTION FILTER Suitable for installation before or after the pump. (NOTE: We always recommend installing a filter before the pump even if you have this one after). Overall length 140mm. Body diameter 55mm. Hose tails 8mm. Supplied with two spring steel mounting clips. #FFINJ8 £8 (£9.60 inc vat)
ONLINE
360° VIEW
FUEL INJECTION FILTER WITH ONE ANGLED END Suitable for installation before or after the pump. (NOTE: We always recommend installing a filter before the pump even if you have this one after). Overall length 132mm. Body diameter 56mm. Hose tails 8mm. Supplied with two spring steel mounting clips. #FFINJ890 £9 (£10.80 inc vat)
ONLINE
360° VIEW
Page 70
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733