This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
SILICONE BRAKE & CLUTCH FLUID Top specification DOT 5 fluid. Never needs replacing. Will not damage paintwork. Non-toxic. Helps eliminate corrosion. Repels moisture. High boiling point. ½ ltr #SILBF1 £16 (£19.20 inc vat) 1 ltr #SILBF2 £28.50 (£34.20 inc vat)
BRAKE PIPE BENDER A rare little tool manufactured specifically for 3/16" brake pipe. Will form very neat bends down to around 10mm radius. #BPBEND £16 (£19.20 inc vat)
ONLINE
360° VIEW
PIPE BENDER The ’Rolls Royce’ of small tube benders. Ingenious, adjustable former allows perfect fit for all tubes from 3/16" to 10mm diameter. Suitable for Aluminium, Copper and Steel. Heavy Duty construction and simple operation. Bending radius of between 22mm and 25mm depending on tube diameter. #BPBEND2 £48 (£57.60 inc vat)
POWER BRAKE BLEEDER. This has to be the easiest way to bleed your brakes. Just connect to an air line from your workshop compressor, loosen your bleed screw, push on the black rubber adapter and pull the trigger. Venturi effect draws fluid through the 2 metre clear tube and into the 750ml container. When all the bubbles are clear from the fluid in the pipe just tighten the bleed screw and it's done. Clean and easy. You don't even have to touch your pedals. Repeat for each cylinder or caliper. Air line union included. Working pressure 75psi to 120psi. Maximum air consumption 6.5cfm. Maximum vacuum -13.5ft Hg. #POBRBL £30 (£36 inc vat)
ONLINE
360° VIEW
ONLINE
360° VIEW
SMALL TUBE BENDER Here's a great little bender for smaller pipes 1/8", 3/16" and 1/4" (3mm, 5mm and 6mm). Will bend to 15mm radius. Tool 135mm long. #BPBEND3 £12 (£14.40 inc vat)